Related Manuals for Televes H30FLEX Sky
Summary of Contents for Televes H30FLEX Sky
- Page 1 Ref. 593395 Instruction Manual Digital processing handheld DVB Meter / Analyzer w w w . t e l e v e s . c o m...
-
Page 3: Table Of Contents
Connectors and controls 6. Setup Keyboard Power supply iPad App About battery 1.- Connection between the iPad Product operation and the H30FLEX Sky Top bar icons 2. Features 1.- DTH Wideband 2.1.-Loggers 2.2.-Wi-Fi Test 2.- DTH 2.3.-Screen Mirroring 2.1.- Dish Alignment 2.4.-TAPS Portal... -
Page 4: Safety Requirements
Analyzer H30FLEX Sky handheld DVB meter / Safety requirements Servicing - There are no user serviceable parts except the battery. Do not attempt to service this product or Product inspection remove covers other than the battery cover. Refer - Inspect the equipment for shipping damage. -
Page 5: Overview
DVB Sky installator in mind. Quick and easy to use interface with features The H30FLEX Sky is a light weight, rugged unit, such as Channel measurements, System Scans, packed with all the features needed to install and Constellation Diagram, Spectrum Analyzer, troubleshoot a television system. -
Page 6: General Specifications
Analyzer H30FLEX Sky handheld DVB meter / General Specifications Display 2.8” TFT 400 x 240 full colour Weight 510g (12.12lb) Dimensions 175 x 100 x 52 mm / 6.9 x 3.9 x 2 in (H x W x D) Input: 100-240V~ 50-60Hz... -
Page 7: Technical Specifications
Technical Specifications Constellation Digital Measurements DVB-S2 Frequency MPEG image Range 50 - 880 MHz and 950 - 2200 MHz QPSK, 8PSK Modulations Resolution 125 kHz Power 45-110dBuV (25-120dBuV opt.593235) Tuning Frequency or channel Up to 10dB Link Margin Input Up to 20dB Impedance 75Ω... -
Page 8: Description Of Equipment Components
5. USB connector 6. RF F-connector (see options below). Setup button: Parameters window for F-connector options the current function. If the H30FLEX Sky is in the main menu, alloes to access to the global paramenters (See section 7.- Setup) 7. LED Powering: Indicates if the equipment is powering an external load. -
Page 9: Power Supply
Power supply From a fully discharged state, a full charge takes A DC adapter is provided to power and charge the approximately 8 hours and a 3 hour charge will meter. Plug the adapter into a properly grounded provide approximately a 75% charge. electrical supply and the power connector on the The charge management system will detect side of the unit. -
Page 10: Product Operation
If you seletected the Wideband LNB or Hybrid LNB, 1.- DTH Wideband the H30FLEX SKY will show messages indicating when you must switch between horizontal This feature is a shortcut to the DTH feature and vertical polarization before starting the selecting a wideband LNB. -
Page 11: Dish Check
Color according to checkmarks the dish check fails. If you seletected the Wideband LNB ir Hybrid LNB, the H30FLEX SKY will show messages indicating 2.3.- Dish Logger when you must switch between horizontal and vertical polarization before starting the This feature is similar to the Dish Check one, but corresponding measurement. -
Page 12: Cable Logger
Channel Info 2.4.- Cable Logger Once the Dish Logger is done, you must connect the H30FLEX SKY to the outlet of the house the set top box is connected to and run the Cable Logger feature. This feature makes a scan in all the channels of the plan. -
Page 13: Mdu
The performance measurement is the quotient When the scan is finished, the result of the scan is shown in the screen: between the current LKM value and the maximum one. When the performance indicator is green, the dish is aligned. Channel and Power and LKM Result of... -
Page 14: Sat1 Logger
Analyzer H30FLEX Sky handheld DVB meter / 3.3.- SAT1 Logger Channel and Power and LKM Frequency measurements to hange This feature is similar to the Dish Check one, but of the selected Long press OK to in this case the device makes a scan in all the... -
Page 15: Ports Logger
Channel and This feature checks the four outputs of the switch. Frequency The H30FLEX Sky will guide through the process change with messages that tell you what to do in each step, as you can see in the image below:... -
Page 16: Sat2 Logger
Analyzer H30FLEX Sky handheld DVB meter / 3.7.- SAT2 Logger If one or more channels fail, it is considered that the dish check fails. This feature is similar to the Dish Check one, but in this case the device makes a scan in all the channels of the plan. -
Page 17: Spectrum
Due to the accuracy and level of detail provided List of measurements Color according to by this spectrum analyzer, the H30FLEX SKY is with pass/fail indicators checkmarks the ideal tool for identifying and locating noise, interference, ingress and other waveforms that 5.1.2. -
Page 18: Video
Analyzer H30FLEX Sky handheld DVB meter / 5.2.2. Setup - Ref. Level: Select the reference level of the spectrum graph - dB/div: 5 dB/div, 10 dB/div Press to change Spectrum options. - Tuning: Channel, Frequency - A/D: Auto, Analog, Digital. -
Page 19: Wi-Fi Scan
5.3.2. Setup 5.4. Wi-Fi Scan Press to change the Channel Info options. Analyzes the Wi-Fi band and automatically detects all the Wi-Fi networks, as well as their names and the power of the access point’s signal. There are two different screens to display the information: List and Map. -
Page 20: Speed Test
H30FLEX SKY. The first time that you run this feature, you must turn on your H30FLEX SKY Wi-Fi. To do that go to Setup -> Wi-Fi Ap. 5.4.3. Setup Then, go to the Settings menu on your iPad, turn... -
Page 21: Fast Scan
Bar graph representing all the channels. Ethernet connector. Color according to checkmarks Once the App is launched, a window will be shown in the H30FLEX SKY, displaying the status of the process: 5.6.2. Setup Press to change the Fast Scan options. -
Page 22: Hdmi Input
Analyzer H30FLEX Sky handheld DVB meter / slof frequency (1210MHz) and will set the slot with the meter parameters: frequency, band (powering), and DiSEqC. In addition, a SCR 5.8. Learning plan icon will be shown in the bar at the top (SCR3) to indicate thar the slot is enabled. -
Page 23: Constellation
5.9.2. Setup 5.9. Constellation Press to change Constellation options. (only for administrator users) Digital video often does not show signal impairment until it is too late due to the small margin between acceptable quality and failure. Constellation diagrams are an indispensable tool to help detect the presence of noise, phase jitter, interference, and gain compression, all of which impact overall signal quality and thus reduce... -
Page 24: Echoes
Analyzer H30FLEX Sky handheld DVB meter / 5.10.2. Setup 5.10. Echoes Press to change Echoes options. (only for administrator users) It is important to check that no echoes can cause problems in the reception of DVB-T and DVB-T2 signals. This feature you allows to visualize the echoes... -
Page 25: Ipad App
1.- Connection between the If Other is selected, you must enter the iPad and the H30FLEX Sky frequency. You only need to have turn your H30FLEX Sky on - Language: English, Español. and follow these steps: - Units(*): dBµV, dBmV, dBm... -
Page 26: Features
Tap on Unpair to disconnect Tap on Pair When you tap on the H30FLEX Sky button, you will see a list with all the H30FLEX Sky found at that moment: 2. Features Select your H30FLEX Sky Once your iPad and your H30FLEX Sky are... -
Page 27: Wi-Fi Test
Tap on the arrow button to hide the keyboard Test Wi-Fi -Test H30: measures the speed of the connection between the iPad and the H30FLEX Sky, using the device’s Wi-Fi Tap on key board buttons to manage the H30FLEX Sky -Test Wi-Fi: you must connect the H30FLEX Sky to the customer’s router by Ethernet, and connect the... -
Page 28: Taps Portal
Analyzer H30FLEX Sky handheld DVB meter / 2.4.-TAPS Portal 2.6.-Info This feature runs Safari and open the TAPS- Shows the iPad and the H30FLEX Sky information: Engineer Information Portal website. 2.5.-Settings The Settings screen looks like this: 2.7.-Manual Shows the H30FLEX Sky user manual: -Updates: shows the latest versions of firmware and channel plans. -
Page 29: Error Messages
Error Messages Maintenance LOW BATTERY Always disconnect the unit before cleaning. Use Indicates that the battery is about to finish. The only a mild solution of detergent and water applied battery icon is red now. It is recommended to with a soft damp cloth. Dry thoroughly before use. connect the meter to the external power source. - Page 31 593395_014_EN...
Need help?
Do you have a question about the H30FLEX Sky and is the answer not in the manual?
Questions and answers