8. OPERATION
3. Press 3 / 4 to select "Save Setting" , and then press OK.
4. Press 3 / 4 to select the desired memory location of the
setting.
5. Press OK to save the setting.
6. To exit from the GUI, press Menu.
Selecting a saved setting
1. Press Menu.
2. Press 1 / 2 to select "Fine Sync" .
3. Press 3 / 4 to select "Select Setting" , and then press 2.
4. Press 3 / 4 to select the desired memory setting.
5. Press OK to select the setting.
6. To exit from the GUI, press Menu.
– If the memory position has not been set, the resolution and
frequency will not be displayed.
– When selecting the stored adjustment setting with "Select
Setting" , the computer system should match the stored
setting.
Notes:
Personal preferences/Other settings
OTHER SETTINGS
Reverse/Invert Image Function
This projector is equipped with a reverse/invert image function
which allows you to reverse or invert the projected image for
various applications.
Front
Ceiling+Front
Rear
Ceiling+Rear
SCREEN
1. Press Menu.
2. Press 1 / 2 to select "PRJ Mode" .
3. Press 3 / 4 to select the desired projection mode.
4. Press OK to save the setting.
5. To exit from the GUI, press Menu.
Normal image
SCREEN
Inverted image
SCREEN
Reversed image
SCREEN
Reversed and inverted image
19