Chapter 2
The following example shows how to create an administrative VLAN per segment. Here VLAN 2 is
configured as the administrative VLAN only for REP segment 2. All remaining segments that are not
configured otherwise will, by default, have VLAN 1 as the administrative VLAN.
Switch# configure terminal
Switch (config)# rep admin vlan 2 segment 2
Switch (config)# end
You can verify your settings by entering the show interface rep detail privileged EXEC command.
Related Commands
Command
show interfaces rep
detail
Description
Displays detailed REP configuration and status for all interfaces or the
specified interface, including the administrative VLAN.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
rep admin vlan
2-627