Call Indications ( Call/Line K Eys); Speakerphone - Samsung LCD 24B User Manual

DCS Gateway
(The ring patterns can be changed using the Gateway Mainte-
nance and Administration Program. See your System Adminis-
trator if you are not sure what they are.)
Call Indications (
Each key on your keyset has an LED. Some of these are tri-
coloured LEDs that light green, red or amber. Some can only
light red. See the relevant keyset layout diagram (below) for a
description of the keyset you are using.
You can have up to eight CALL keys assigned, but two are
recommended. Internal calls will appear on your CALL keys
and will flash green.
If individual line keys are assigned, outside calls appear on
these keys. If an individual line is not assigned to its own key,
it may appear on a CALL key. Your outside calls will light
green on your keyset and red on other keysets.
You never lose sight of your calls while they are on hold. They
stay right where you put them and are identified with a green
flashing light.
Some simple rules to remember:
• Any steady LED indicates that the line or feature is in use.
• A fast flashing green LED indicates a new incoming call.
• A slow flashing green or red LED indicates that a call is on
hold.
• A slow flashing amber LED indicates a recall to your key-
set.

Speakerphone

Pressing the
ANS/RLS
speakerphone.
CALL/LINE K
key will answer or release a call on the
— 2 —
Keyset User Guide
eys)