Labelling Programmable Keys; Selecting Key Features Using Menus - Samsung LCD 24B User Manual

DCS Gateway

Labelling Programmable Keys

• Insert the end of a paper clip into the notch of the clear
cover.
• Push the cover sideways, lift the cover and remove the des-
ignation strip.
• Label the designation strip.
• Replace the strip and cover.

Selecting Key Features Using Menus

In order to use any features that are not assigned to program
keys, you can press the
on the LCD and then use the soft keys to select the required
feature(s).
The three soft keys below the display are substitutes for dedi-
cated feature keys and access codes. Pressing one of these keys
has the same effect as pressing a programmed key. These keys
are context sensitive and their functions change to present you
with the best options for a particular call condition.
The key is used to display options available at a par-
SCROLL
ticular time or during a specific procedure. Press this key once
while in the idle state to view the main feature menus avail-
able.
SCROLL
201:STN NAME
CALL OTHER
— 7 —
Keyset User Guide
key to display feature menus
ANS➔