Page 2
DTI-2 __________________________ __________________________ EN User manual NL Gebruiksaanwijzing DE Benutzerhandbuch FR Mode d’emploi SV Användarhandbok SR Korisničko uputstvo...
Contents Important Important Safety Instructions Notice Recycling Your Discreet Tension Indicator Introduction What’s in the box Overview of the device User interface Intended use How to use the device Wearing instructions Switching the device on/off Bluetooth wireless data transmission Event marker Status button Time synchronization Battery charging...
Notice Any changes or modifications made to this device that are not expressively approved by Philips may void the user’s authority to operate the equipment. This is a class 1 device.
NOTICE: Changes or modifications made to this equipment not expressly approved by PHILIPS may void the FCC authorization to operate this equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Always bring your product to a professional to remove the built-in battery. 2 Your Discreet Tension Indicator Congratulations on your purchase and welcome to Philips! Introduction The Discreet Tension Indicator (DTI-2) is a wrist worn sensor device for daily life use.
What’s in the box Check and identify the contents of your package: 1 x Sensor wristband 1 x USB cable 1 x USB charger 1 x quick start guide Overview of the device User interface Fastening hinge – the USB connector is behind it Skin conductance electrode Wrist strap Skin temperature sensor...
User interface LED arrays Bluetooth button On/off button Bluetooth LED Status button Event marker button Two 8-piece LED arrays are available for communications to the wearer. The arrays lit when the device switches on or off. When the status button is switched the skin conductance level and skin temperature are visible for 10 seconds.
Time synchronization The DTI-2 can keep track of time and date. In active mode and in sleep mode the internal real time clock takes care of this. All measured sensor data is time stamped and stored in a data file on the microSD card.
XXX is the serial number of the device. This file can be converted into a text file with the DTI-2_SampleFileParser-P program which is present on the DTI-2 data storage disk. Run this program, select the .dti file, and choose Convert DTI Sample File. This will generate a text file...
Page 12
Connect the device to a computer with a USB cable.The DTI-2 mounts as ‘’Device with Removable Storage’’ on your computer. Open the explorer and click the drive associated with the DTI-2 (should this fail to happen unplug the USB cable and reconnect it). In the directory DTI-2_DTIfileDataViewerV1.0 Installer a program called setup.exe is...
5 Product Information 39.5 x 12 x 63.5 mm Dimensions Weight 40 g Power supply Charger: Input: AC 100-240V, 50/60 Hz Output: DC 5V 0.5A Battery: 3.7V 400mAh Lithium Polymer Battery life 30 hours without wireless data streaming 12 hours with wireless data streaming -20 –...