Connect And Start Djing; Connection Diagram - Numark NS6 II Quick Start Manual

2. Connect and Start DJing!

Follow this sequence of steps whenever you use NS6II:
1. Make sure all devices are off and all faders and gain knobs are set to "zero."
2. Connect input sources (microphones, turntables, CD players, etc.) to the NS6II.
3. Connect output devices (power amplifiers, sub-mixer, recorders, etc.) to the NS6II.
4. Plug all devices into power sources, and turn on devices in proper order:
• When starting a session, turn on (1) input sources, (2) NS6II, (3) output devices.
• When ending a session, turn off (1) output devices, (2) NS6II, (3) input sources.
5. Connect the NS6II to your computer with the USB cable (included) and to your
headphones.
6. Open Serato DJ and go! For more information on how to use Serato DJ with NS6II, visit
serato.com/dj/support
Important:
•
Touch the platters to calibrate the touch-sensitive circuitry before using NS6II.
•
When reconnecting the NS6II to your computer, the NS6II will recall the previous positions
of the software (e.g., Pitch, effects parameters, etc.). Be mindful of this before playing a
track.

Connection Diagram

Computer(s)
Power
Items not listed under
4
and select Numark NS6II.
CD Player Turntable
Introduction > Box Contents
Microphone
Rear Panel
are sold separately.
House Amp
Headphones
(front panel)
Booth Amp