WARNING: You are requested that you shall not modify or alter the information or data provided herein without prior written consent by Toshiba. Toshiba shall not be liable to anybody for any damages, losses, expenses or costs, if any, incurred in connection with or as a result of such modification or alteration.
Substances. From July 1, 2006, the RoHS Directive will prohibit any marketing of new products containing the restricted substances. Increasing attention is given to issues related to the global environmental. Toshiba Corporation recognizes environmental protection as a key management tasks, and is doing its utmost to enhance and improve the quality and scope of its environmental activities.
Page 5
Print this page SAFETY INSTRUCTION WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "SAFETY PRECAUTION" AND "PRODUCT SAFETY NOTICE" INSTRUCTIONS BELOW. Safety Precaution WARNING: SERVICING SHOULD NOT BE ATTEMPTED BY ANYONE UNFAMILIAR WITH THE NECESSARY PRECAUTIONS ON THIS RECEIVER. THE FOLLOWING ARE THE NECESSARY PRECAUTIONS TO BE OBSERVED BEFORE SERVICING THIS CHASSIS.
Print this page SAFETY INSTRUCTION Handling the LCD Module Safety Precaution In the event that the screen is damaged or the liquid crystal (fluid) leaks, do not breathe in or drink this fluid. Also, never touch this fluid. Such actions could cause toxicity or skin irritation. If this fluid should enter the mouth, rinse the mouth thoroughly with water. If the fluid should contact the skin or clothing, wipe off with alcohol, etc., and rinse thoroughly with water.
Page 9
4. Leaving water or other fluids on the panel screen for an extended period of time can result in discoloration or stripes. Immediately remove any type of fluid from the screen. 5. Glass is used in the panel, so do not drop or strike with hard objects. Such actions can damage the panel. 6.
Print this page FIRMWARE UPDATING PROCEDURE Firmware Upgrade - USB 1. Copy a firmware BIN file to USB disk. (Root directory) 2. Plug USB disk into TV USB port. 3. Reboot (AC Off/On) TV to upgrade firmware automatically. During firmware upgrade, OSD will be displayed on LCD screen, and power status LED will be blinking. 4.
Print this page DESTINATION SETTING CHANGE Whenever replacing the Main PCB with new one, perform this procedure. 1. Press "Mute" key twice on the Remote. 2. Press "Menu" button on the TV set. Then the OSD is displayed. 3. Move to Tag "3" by Right/Left Arrow key on the Remote. 4.
: Variable Resistor : Electrolytic : Metal Film : Fusible Resistor All CD and PF capacitors are ±5 %, 50 V and all resistor, ±5 %, 1/6 W unless otherwise noted. >> terms and conditions >> privacy policy TOSHIBA WEB-ZEUS...