GE Advisor MASTER ATS111 series Manager Manual page 49

To create (and change) a user
The procedure to create a user may vary depending on whether you are creating a user higher than 200 or
higher than 1000.
1. Access menu option 14 and press 3 to create a user.
The display shows:
Example:
2. Select the system user number (card number) and press [ENTER].
The display shows the users alarm group.
Example:
3. Do one of the following options:
Option
Select the number of the alarm group to be issued to this user. See Note 2
Display the list of alarm groups that you can issue to a user (if any)
Move on to next display
The display shows the user door group.
Card users must always have a valid door group assigned in order to perform alarm control or door functions.
Example:
4. Enter the door group number to be issued to the user (if any), or press [ENTER] to move to the next
display.
The display shows the user floor group.
Example:
5. Select the floor group number to be issued to the user (if any), or press [ENTER] to move to the next
display.
6. If the user number that you are programming is higher than 1000, and User Flags are not displayed in your
system, then all the options available have been programmed and the display will return to step 1.
If the system has been programmed so that users do not have name files, or if you are programming a user
higher than 200 and User Flags are not displayed, skip to step 10.
With file names, skip to step 8.
Create User
User No:
*-View, Alm Grp:1-No Access
Alarm Group:
Door Group: 0
Door Group:
Floor Group: 0
Floor Group:
Action
Enter the zone number and press [ENTER]
Press [NEXT]
Press [ENTER]
49