GE Advisor MASTER ATS111 series Manager Manual page 48

48
ATS Control Panel
Manager's manual
The display shows the user's alarm group.
Example:
3. Press [ENTER].
The display shows the user's door group.
Example:
4. Press [ENTER].
The display shows the user floor group.
Example:
5. Press [ENTER].
If your system is programmed to assign special User Flags to users, the display will now show the User Flags
in sequence. See the section "Create (and change) a user" for User Flag details.
The display shows the user name (if any and the user number is 200 or less).
Example:
6. Press [ENTER]. The display shows the user PIN code.
Exceptions:
•
PIN code view is disabled.
•
There is no PIN code programmed.
•
Depending on the memory mode, user numbers above 1000 will not be displayed.
Example:
7. In case the special memory mode is selected, press [ENTER]. The display shows the user's Card Bits. This
is a representation of the code present in the card.
Example:
8. Press [ENTER] to return to step 1.
*-View, Alm Grp:12,Forman
Press ENTER
Door Group: 2
Press ENTER
Floor Group: 1
Press ENTER
Your Name is Ann Brown, (*)-End
Ann Brown
Pin Code: 1234
Press ENTER
Card Bits: 27.0.0.4.210.0.2
Press ENTER