Configuring The Gpon Onu Type Profile; Table 2-1 Configuration Data Of The Gpon Onu Type - Zte ZXA10 C300 Configuration Manual

2.1 Configuring the GPON ONU Type Profile

Before authenticating the GPON optical network unit (ONU), you need to create an ONU
type profile if the ONU type does not exist.
Context
The ZXA10 C300 supports the following default GPON
l
ZTE-F601
l
ZTE-F621
l
ZTE-F622
l
ZTE-F625
l
ZTE-F628
l
ZTE-F640
l
ZTE-F641
The ZXA10 C300 supports the only one type of XG-PON ONU: ZTE-F220.
On the ZXA10 C300, ZTE-9806, ZTE-F822, and ZTE-F820 are EPON ONU types. If
you need to configure the corresponding GPON ONU type, you can use ZTEG-9806H,
ZTEG-F822, and ZTEG-F820 respectively.
You can use the show onu-type gpon command to query the default GPON ONU types.
Configuration Data
Table 2-1

Table 2-1 Configuration Data of the GPON ONU Type

Item
ONU type
ONU description
Maximum T-CONT
Maximum number of GEM ports
Maximum number of switch units per slot
Maximum number of flows per switch unit
Number of user ports
Steps
1. Enter global configuration mode.
ZXAN#configure terminal
Enter configuration commands, one per line. End with CTRL/Z.
ZXAN(config)#
2. In PON
SJ-20130520164529-007|2013-06-30 (R1.0)
lists the configuration data of the GPON ONU type.
configuration mode, create an ONU type profile.
Chapter 2 GPON/XG-PON Service Configuration
ONU
Data
ZTEG-F620
4ETH,2POTS
7
32
1
8
ETH: 4
POTS: 2
2-3
ZTE Proprietary and Confidential
types.