Table 14-1 Configuration Data Of Port Identification - Zte ZXA10 C300 Configuration Manual

ZXA10 C300 Configuration Manual (CLI)
Context
When subscribers access the Internet in
Relay Agent, DHCPv6 Layer-2 Relay Agent, or
the system uses the corresponding agent to locate port. The system sends the packets
with port information to authentication servers to bind subscribers accounts and circuits.
Configuration Data
Table 14-1

Table 14-1 Configuration Data of Port Identification

Item
Port-Identification global
Port-Identification interface
Steps
1. Configure access node master identifier type.
ZXAN(config)#port-identification access-node-id-type access-node-name
2. Configure the access node name.
ZXAN(config)#port-identification access-node-name ZXA10-C300
3. Configure the access node slave identifier.
ZXAN(config)#port-identification access-node-slave-id ZTE
4. Enter
ZXAN(config)#interface gpon-onu_1/5/1:1
ZXAN(config-if)#port-identification sub-option remote-id enable vport 1
ZXAN(config-if)#port-identification sub-option remote-id name REMOTE-ID vport 1
ZXAN(config-if)#exit
5. (Optional) Query the global configuration of port identification.
ZXAN(config)#show port-identification global
access-node-name
access-node-id-type
access-node-slave-id
rackno
shelfno
6. (Optional) Query the interface configuration of port identification.
ZXAN(config)#show port-identification port gpon-onu_1/5/1:1 vport 1
SJ-20130520164529-007|2013-06-30 (R1.0)
lists the configuration data of port identification.
GPON-ONU interface mode, and configure the remote ID field.
: ZXA10-C300
: access-node-name
: ZTE
: 1
: 1
PPPoE Intermediate Agent, DHCPv4 Layer-2
NDP Line Identification Option (LIO) mode,
Data
l
Master identifier type: access-node-name
l Access node name: ZXA10–C300
l Slave identifier: ZTE
l
Interface: gpon-onu_1/5/1:1
l Virtual port: 1
l Remote ID status: enable
l Remote ID name: REMOTE-ID
14-2
ZTE Proprietary and Confidential