Upnp Settings - Fritz! Box 7560 Configuration And Operation

Network Settings in the FRITZ!Box
prefixes or IPv6 addresses can all be assigned by DHCPv6.
Define which IPv6 settings should be assigned by the
DHCPv6 server.
Changing Network Settings
1.
2.
3.
4.
5.
Note that changes to the network settings in the FRITZ!Box
may make it necessary to adjust the network settings of your
computers so that you can continue to access the FRITZ!Box
user interface.

UPnP Settings

The Universal Plug-and-Play (UPnP) service included in your
FRITZ!Box provides status information about the FRITZ!Box to
all connected computers. UPnP-compliant programs on these
computers can receive this information and use it to display
the status of the FRITZ!Box (e.g., connection status, data
transmission). UPnP service thus allows you to monitor your
FRITZ!Box from a connected computer.
Here is how to change the UPnP settings:
1.
2.
3.
4.
5.
FRITZ!Box 7560
Open the FRITZ!Box user interface.
Enable the advanced view.
Select the "Home Network / Home Network Overview"
menu.
Select the "Network Settings" page.
Click the "IPv4 Addresses" or "IPv6 Addresses" button,
depending on the address range you would like to
change.
Open the FRITZ!Box user interface.
Enable the advanced view.
Select the "Home Network / Home Network Overview"
menu.
Select the "Network Settings" tab.
Configure the UPnP settings in the "Access Settings in
the Home Network" area.
119