Setting The Independent Key Transition Type By A Menu Operation - Sony DVS-9000 User Manual

Independent key transition operations when using the CCP-6224/
6324 Control Panel
To carry out an independent key transition, press the corresponding button in
the independent key transition execution section of the transition control block.
The color of the button shows the status as follows.
Lit green: transition in progress.
Lit amber: key inserted.
Lit red: key inserted into final program output.
Off: no key inserted.
For details of setting the transition rate, see "Setting the transition rate in the
Flexi Pad control block" (page 169).
Setting the Independent Key Transition Type by a Menu
Operation
You can also select the required independent key transition type by a menu
operation.
1
2
188
Independent Key Transitions
Independent key transition execution section
ON ON ON
1 2 3 4 1 2 3 4 1 2 3 4
BKGD KEY1 KEY2 KEY3
KEY
MIX NAM
PRIOR
PST
ALL COLOR WIPE
MIX
PRIOR NORM
NORM REV
SET /REV
AUTO
TRANS
Transition control block (compact type)
In the M/E or PGM/PST menu, select first the desired one from VF1
'Key1' to VF4 'Key4,' then HF6 'Transition.'
The Transition menu for the selected appears.
Select the required transition type in the <Transition Type> group.
ON
1 2 3 4
KEY4
SUPER
MIX
DME
TRANS
PVW
CUT
KEY1
TRANS
KEY2
TRANS
KEY3
TRANS
KEY4
TRANS