Assigning A Function To The Key 2 Row Cross-Point Buttons - Sony DVS-9000 User Manual

With ccp-8000 series center control panel

Hide thumbs Also See for DVS-9000:

Table of Contents

To abandon the process of menu shortcut assignment

In the Prefs/Utility >Utility Module Assign menu, press [Menu Shortcut].

This exits the menu shortcut assignment mode.

Setting names to be displayed in memory recall buttons

The name you set using the following procedure is displayed only when "Menu

Shortcut" or "Utility Command" has been assigned to the selected memory

recall button. To set a name for display in a memory recall button to which

"Shotbox Recall" or "Macro Recall" has been assigned, use the Shotbox menu

or Macro menu.

Assigning a Function to the Key 2 Row Cross-Point

You can assign a function to the key 2 row cross-point buttons of each of the

M/E-1 to M/E-3, or PGM/PST banks, and use them in the same way as the

buttons in the utility/shot box control block.

Setting Button Assignments (Prefs/Utility Menu)

In the Prefs/Utility >Utility Module Assign menu, select the button using

any of the following methods.

• Press directly on the list.

• Press the arrow keys to scroll the reverse video cursor.

• Turn the knobs.

Bank selection

Control block button selection

Press [Name].

A keyboard window appears.

Enter a name of not more than eight characters, and press [Enter].

The name you have set is reflected in the status area and on the memory

recall button in the utility/shotbox control block.

In the Prefs/Utility menu, press [Key2/4 Bus Button Assign].

The Key2/4 Bus Button Assign menu appears. The cross-point settings for

the key 2 row appear.

Setting values