Set The Line Thickening For Postscript Files - Oce ColorWave 900 User Manual

Set the line thickening for PostScript files

Introduction
Enable the [Line thickening] setting to increase the width of very thin lines to improve readability.
When disabled, the original drawing line thickness is applied.
Procedure
1. Open the [Preferences] - [PostScript] tab.
2. Click on the [Line thickening] setting.
3. Select the correct value.
4. Click [Ok] to confirm, or [Cancel] to reject your entries.
Set the line thickening for PostScript files
Chapter 8 - Adjust the print quality and print productivity 171