Resetting The Password For The Local Admin User; Tasks That Are Unique To Storeonce System; Rack Stability - HPE STOREONCE 5500 Maintenance And Service Manual

Resetting the password for the local Admin user

Procedure
1. Gain access to the local system console either using a locally attached USB keyboard and Monitor or via
iLO remote console.
2. At the Login prompt type: HPresetpassword
3. When prompted for the password enter the current password. The default is hpresetpassword, but if you
are following best practices you will have changed this Password after installation.
4. Once logged in a list of available commands will be presented.
5. Type reset; this will immediately reset the default password of the Admin user to admin.
6. Type exit to log out.

Tasks that are unique to StoreOnce System

The following tasks are described in this guide:
• Replacing the motherboard
• Replacing the HP RAID controller
• Replacing the Cache module and SuperCapacitor
• Replacing removable hard disks
• Understanding StoreOnce LEDs
• Running the QR ISO

Rack stability

To protect personnel and equipment, take the following steps to ensure that racks are stable.
WARNING:
To reduce the risk of personal injury or damage to equipment:
• Extend leveling jacks to the floor.
• Ensure that the full weight of the rack rests on the leveling jacks.
• Install stabilizing feet on the rack.
• In multiple-rack installations, fasten racks together securely.
• Extend only one rack component at a time. If more than one component is extended, racks can
become unstable.
16 Resetting the password for the local Admin user