Fujitsu ETERNUS DX100 S4 Basic Operation Manual page 91

Chapter 5 Component Expansion/Function Enhancement
5.2 Installing Additional Drive Enclosures
(6)
Fasten the high-density drive enclosure in the rack.
Use four M5 screws to fasten it in the rack pillar.
M5 screws
(Rack pillar: front)
(7)
Attach the cable management arm.
To attach the cable management arm, place the arm in the bracket on the rear of the high-
density drive enclosure. After placing the arm in the bracket, firmly attach the arm with the pin.
FUJITSU Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Operation Guide (Basic)
M5 screws
Cable
management arm
91
Copyright 2017 FUJITSU LIMITED
(Rack pillar: rear)
Pin
P3AM-7662-09ENZ0