GE IC754VSB06MTD Hardware User's Manual page 40

3
Upper case characters are accessed by pressing the SHIFT key once. This is
equivalent to holding down the SHIFT key on a conventional keyboard. The
SHIFT key is active while the next key is pressed then reverts back to its
unselected state. The CAP key does the same thing as SHIFT but does not
revert to lower case after another key is pressed. Pressing the CAP key causes
the Soft Input Panel to remain in upper case mode. The CTRL and ALT keys
behave the same as the SHIFT key.
Small Key: Upper Case
Large Key configuration: Provides alphabetic or numeric keys alone. No
numeric keys are displayed at the top of the alpha panel; alpha keys are not
displayed on the numeric panel. As with the small key configuration, upper or
lower case alpha keys can be displayed by using the
Large Key: Lower Case
Pressing the 123 key once locks the panel in numeric mode until the 123 key is
pressed again.
3-12 6" QuickPanel* ViewBasic, Monochrome, Round Bezel – September 2010
key.
SHIFT
GFK-2327B