How To Recover Error - Hitachi HT-4139-28 Troubleshooting Manual

A-1 How to Recover Error
Sometimes continuous scanning will be suspended due to paper jam or other reasons. In that
case put sheets that have not been scanned on the hopper and continue scanning process.
(There are some software/ hardware errors that cannot be recovered.)
A sample of error recovery is shown below.
No
Is the first sheet
scanned?
Put all sheets
on the hopper
nd
Put 2
in the hopper.
This is a sample of error recovery flow and it should be modified for your business operation.
Scanning is stopped
Open a cover and remove sheets
No
Is there any ejected sheets?
Put back ejected/
Yes
un-scanned sheets
and removed sheets
in the hopper.
sheet and later
Removed and Scanned sheets--
Re-scanning
Yes
No
Ejected sheets are
scanned?
Yes
Removed sheets are
scanned?
Ejected sheets
Troubleshooting
No
Yes
Put removed sheets
that are not scanned
in the hopper
A-1