Level 1 and 2 Service Manual
6809490A77-O
Display Locking
Tab
Figure 17. Removing the Display Assembly
To Replace the Display Assembly
1.
Align the display assembly with the transceiver board.
2.
Snap the 2 display locking tabs into place.
3.
Carefully press the display flex connector into the transceiver board display
connector.
4.
Replace the joystick assembly, transceiver board, rear housing, USIM, battery,
and battery door as described in the procedures.
October 4, 2004
Disassembly
Transceiver
Board
Display
Assembly
31