Philips MCP9360i Service Manual page 59

12.15.5. CPU Replacement
1. Remove the motherboard subassembly. See paragraph 12.15.1.
2. Release the CPU mounting clamp (18). See Figure 12.15-9.
3. Remove the CPU from the socket.
12.15.6. CPU Re-Assembly
To re-assemble the CPU, do all steps described in paragraph 12.15.5 in reverse order.
Note: Apply thermal transfer compound between the CPU and the heat sink.
12.15.7. DIMM Replacement
1. Remove the motherboard subassembly. See paragraph 12.15.1.
2. Release the retaining clips (19) on the DIMM connector. See Figure 12.15-10.
3. Remove the DIMM from the motherboard.
Note: When a specific DIMM has been identified as faulty by a software test make sure that you can match the identification to the
relevant DIMM connector on the motherboard. See Figure 12.15-11 for information on DIMM connector identification.
19
18
Figure 12.15-9
Figure 12.15-10
Hardware Repair
19
MCP9360i 12. EN 59