Tv Tuner Card - Philips MCP9360i Service Manual

12.7.

TV Tuner Card

12.7.1. TV Tuner Card Removal
1. Remove the top cover. See paragraph 12.1.1.
2. Remove the riser card subassembly. See paragraph 12.5.1.
3. Remove the 4 mounting screws (1) from the riser card subassembly backplate. See Figure 12.7-1.
4. Remove the 2 mounting screws (2) from the PCI riser card. See Figure 12.7-2.
5. Remove the 2 mounting screws (3) from the TV tuner card. See Figure 12.7-3.
6. Remove together the TV tuner card and the PCI riser card from the riser bracket.
7. Pull the TV tuner card free from the PCI riser card connector.
1
12.7.2. TV Tuner Card Re-Assembly
To re-assemble the TV tuner card, do all steps described in paragraph 12.7.1 in reverse order.
Note: Make sure that the TV tuner card is inserted into the correct connector on the PCI riser card.
Note: The torque setting required for the TV tuner card mounting screws (3) is 6 kg-cm.
The torque setting required for the PCI riser card mounting screws (2) is 6 kg-cm.
The torque setting required for the riser card backplate mounting screws (1) is 8 kg-cm.
1
1
1
Figure 12.7-1
3
Figure 12.7-3
Hardware Repair
2
3
MCP9360i 12.
2
Figure 12.7-2
EN 45