Samsung SPC-300 User Manual

Coaxial remote controller

Advertisement

COAXIAL REMOTE
CONTROLLER
User Manual
SPC-300

Advertisement

Table of Contents
loading

Summary of Contents for Samsung SPC-300

  • Page 1 COAXIAL REMOTE CONTROLLER User Manual SPC-300...
  • Page 2: User Manual

    Warranty If the product does not operate properly in normal conditions, please let us know. Samsung Techwin will resolve the problem for free of charge. The warranty period is 3 years. However, the followings are excluded: •...
  • Page 3 Continued use in such a condition may cause fi re or electric shock. If this product fails to operate normally, contact the nearest service center. Never disassemble or modify this product in any way. (SAMSUNG is not liable for problems caused by unauthorized modifi cations or attempted repair.) When cleaning, do not spray water directly onto parts of the product.
  • Page 4 Safety i n formati o n CAUTION Do not drop objects on the product or apply strong blows to it. Keep away from a location subject to excessive vibration or magnetic interference. Do not install in a location subject to high temperature (over 50°C), low temperature (below -10°C), or high humidity.
  • Page 5 I m portant Safety I n structi o ns Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
  • Page 6 Contents Introduction Introduction Part names and functions ❖ Installation Checking Installation Environment Installation precautions Connection & Control ❖ To Control the camera coaxial communications To control the camera using RS-485 device via coaxial communications To control the camera using RS-232 device via coaxial communications ❖...
  • Page 7 Easy and simple 5-way keys for controlling the camera. ❖ List of controllable models • Capable of controlling A1 series camera products. • You can control cameras supporting COAXITRON. ❖ What’s Included COAXIAL REMOTE CONTROLLER User Manual SPC-300 <Controller> <User Guide> English 7...
  • Page 8: Part Names And Functions

    CABLE COMPENSATION 2 3 4 5 6 7 8 ❻ TERMINATION PROTOCOL REMOTE CONTROLLER SPC-300 ❶ STATUS LED - Displays the status of the current operation. ❷ POWER LED - Switch to select the power source from DC 12 V or 4 AA batteries.
  • Page 9 The effective range of valid address is between 0 and 255 (1~255 for multi- protocol). ❼ Menu Navigation Key Use this to navigate through the menus. For further details on ON/OFF setting of each switch for the applicable configuration, NOTE refer to SPC-300 Connection and Control section. English 9...
  • Page 10 Introduction ❖ PART NAMES AND FUNCTIONS ❖ Rear Panel ❶ ❷ - AA BATTERY ❸ You can use 4 AA-sized batteries for the power. - The average operation time is 20 hours based on the alkaline battery. ❹ (If the battery is discharged, it can cause a distortion of the video signal, or electric interference.) ❺...
  • Page 11 Introduction ❖ RS-485 DC 12V VIDEO RS-232C OUT IN ❶ USB Port This terminal is used for updating the product’s fi rmware. ❷ RS-232 Port (9-pin D SUB) - Used to control remotely using RS-232 communication. ❸ RS-485 Port (4-pin) - Used to control remotely using RS-485 communication.
  • Page 12: Checking Installation Environment

    I n stal l a ti o n CHECKING INSTALLATION ENVIRONMENT • Please check the following instructions before installation for your safety. • The way of connecting the main product with external devices (COAXIAL BNC) is very important to build up a proper system. •...
  • Page 13 Connect the VIDEO IN of the unit and VIDEO OUT of the AI Camera directly. – The A1 camera and SPC-300 should be directly connected to the VIDEO IN. Connect VIDEO OUT of the main unit to a monitor’s video input terminal.
  • Page 14 Connect the VIDEO IN of the unit and VIDEO OUT of the AI Camera directly. – The A1 camera and SPC-300 should be directly connected to the VIDEO IN. Connect VIDEO OUT of the main unit to a monitor’s video input terminal. Connect TX(+/-) of RS-485 device to RX(+/-) of the main unit.
  • Page 15: To Control The Camera Using Rs-232 Device Via Coaxial Communications

    The RS-232 device is the same as RS-485 regarding the protocol setting, but supports only the Samsung protocol. – For proper coaxial communication, AI camera should be set to Samsung protocol. Refer to the switch settings. (See page 18) RS-232 and RS-485 communications cannot be used for simultaneous input.
  • Page 16 Connecti o n & Control TO CONTROL THE CAMERA USING RS-485 OUTPUT AND CONTROL MENU KEYS Connect the product to DC 12V power source or insert 4 AA-sized batteries into the battery compartment. (Power can be supplied via USB cable connection.) Connect the RX(+/-) of the unit to the RS-485 (+/-) port of the camera.
  • Page 17: To Control The Camera Using Rs-485 Signal Output

    Match the camera’s address, baud rate, and protocol to the same to those of the unit. – RS-232 device control supports SAMSUNG-E protocol only. Connect the RS-232 device’s cable to the RS-232 port of the main unit. Using RS-232 device, you can control the camera menu.
  • Page 18: Switch Setting Table

    2 3 4 5 6 7 8 TERMINATION PROTOCOL Protocol Setting Switch Software (0 : , 1 : ) Protocol HALF/FULL Type (A, B, C, D) PIN 1 PIN 2 PIN 3 SAMSUNG-E HALF SAMSUNG-E FULL SAMSUNG-T SIMPLEX SAMSUNG-T FULL PELCO-D SIMPLEX PELCO-D FULL PELCO-P...
  • Page 19 Connecti o n & Control – See the following table to set the baud rate. 2 3 4 5 6 7 8 TERMINATION PROTOCOL BAUD RATE PIN 5 PIN 6 38400 BPS 19200 BPS 9600 BPS 4800 BPS English 19...
  • Page 20: Specifications

    Max. 500m (with 5C-2V cable) Connector Type D-SUB 9P Port 1 Port RS-232 4800/9600/19200/38400bps BAUD RATE (Only Samsung protocol supported) Connector Type 4P Terminal Type RS-485 Port 1 Port BAUD RATE 4800 / 9600 / 19200 / 38400 bps USB PORT(USB2.0)
  • Page 21: Specifi Cations

    Speci fi cati o ns DIMENSIONS Unit (mm) English 21...
  • Page 22 TEL : +82-70-7147-8740~60, FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. 1480 Charles Willard St, Carson, CA 90746, UNITED STATES Samsung House, 1000 Hillswood Drive, Hillswood Business Park Chertsey, Tol Free : +1-877-213-1222, FAX : +1-310-632-2195 Surrey, UNITED KINGDOM KT16 OPS www.samsungcctvusa.com TEL : +44-1932-45-5300, FAX : +44-1932-45-5325 www.samsungtechwin.com...

Table of Contents