Change Login Password; System Log - TP-Link RE200 User Manual

Chapter 5
¾ To reset the extender to factory default settings:
1. Click Factory Restore
2. Wait a few minutes for the reset and reboot.
Note:
• During the reset process, do not power off or reset the extender.
• We strongly recommend you backup the current configuration settings before resetting the extender.
5. 6.

Change Login Password

The account management feature allows you to change your login password of the
management webpage.
1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender.
2. Go to Settings > System Tools
3. Enter the old password, then the new password twice (both case-sensitive) and click
Save.
4. Use the new password for future logins.
5. 7.

System Log

If the extender is not working normally, you can save the system log and send it to our
technical support team.
1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender.
2. Go to Settings > System Tools
¾ To save the system log locally:
1. Choose the type and level of the system log as needed.
to reset the extender.
> Admin Account.
> System Log.
Manage Your Extender
31