To Connect Your Wireless Devices To The Extender Via Wps - TP-Link RE200 User Manual

Chapter 4
4. 2. 2.

To Connect Your Wireless Devices to the Extender via WPS

Wi-Fi Protected Setup (WPS) provides an easier way to set up a secure Wi-Fi connection.
Wireless devices that support WPS, including Android phones, tablets and most USB
network cards, can be connected to your extender through this method (not supported
by iOS devices).
1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender.
2. Go to Settings > Wireless
3. Enable WPS.
4. Connect via WPS:
• AP's PIN: Enable
to get a new PIN or click
• Push Button (Recommended): Click
client device.
> WPS.
AP's PIN and enter the PIN on your device. You can click
Default to restore the PIN to its factory one.
More Features of Your Extender
Connect and push the WPS button on the
Generate
24