Advertisement
Advertisement
Table of Contents
Related Manuals for Toslon TF500
Summary of Contents for Toslon TF500
- Page 2 Check the content Display Transducer (Optional) (Optional) 1) Transducer 2) Knobs 3) Rubber Note: the rubber is different according to different bait boats Transmitter 1) Transmitter 2) Antenna for display 3) Power cable 4) Bttery holder 5) Antenna extended cable 6) Antenna for transmitter 7) Valcro...
- Page 3 Installation (transducer) 1) For general boats, like Carp Madness, Anatec Monocoque, you need need to drill a hole on the boat bottom to fix the transducer. 2) For boats of Carplounge/- Waveruner/ Vegaboat/Carpboat etc, there is a transducer groove on the bottom. So, you only need to simply match the transducer to the boat...
- Page 4 Installation (antenna & wiring) Antenna Installation 1) Drill an hole (5mm diameter) antenna for transmitter antenna_extended cable on the selected position. 2) Screw down the wisher and nut from the antenna extended , then hold the DC cable through the hole from inner housing, and Screw tighted the nut by an wrench.
- Page 5 Powering For display For transmitter 6-12V 6-12V Recomended voltage Absolute Maximum voltage 14.8V 14.8V Note: overvoltage may burn the elements in the device! From bellow shows the voltage range of the most popular batteries in the market: Battery Type Voltage Permission 12V Lead-acid 10.8v~14.8V...
- Page 6 Using Instruction 1) Please do not put the display on ground during the operation, which could cause a short R/C distance. The proper way is using an tripod to support the display, and keep it at least 1.2m above the ground. 2) Make sure the antenna is tighten on the boat, otherwise the R/C distance will be greatly shorten.
- Page 7 Key function Menu Open Menu settings; Switch between menus Finalizes menu selections; confirm a setting Up arrow Move up to select menu; increase a value of option Down arrow Move down to select menu; decrease a value of option Power & Exit Turns unit on/off.
- Page 8 What’s on the display Up range Depth readout Water temperature Unrecognized fish Voltage of transmitter Voltage of display Fish symbol bottom Real-time-window signal indicator Depth range at bottom...
-
Page 9: Menu Operation
Menu Operation In most time the default setting is enough. However in some situation, to get a better using, you need adjusting the menu setting. 1) Sensivity Determines how echoes will be displayed on the screen. Increasing the sensitivity will make you see more details on the screen. - Page 10 Menu List Sensivity Controls the level of details shown on the display. Adjust the threshold of fish size display. higher setting allows weak returns being Fish ID. Sens. displayed as fish, while a low setting will prevent it being displayed as fish. Depth Range Determine in which portion the bottom will be displayed on the screen.
-
Page 11: Specifications And Features
Specifications and Features Display size: 4.3"TFT LCD; Sunlight Viewable Resolution: 480*272Pixels; 65,536 color Display Language: Multi-language Monitor and Display Real-time Voltage of Bait boat Battery IPX6 Level Waterproof Casing Design Depth Capability: 30m (100ft) Sonar Frequency: 115Khz Sonar Sonar Beam Angle: 60deg @-10db Sonar Alarms: Fish / Shallow / Low Battery RC Distance(field test): Max 300m (1000ft) Radio Frequency: 2.4Ghz...
Need help?
Do you have a question about the TF500 and is the answer not in the manual?
Questions and answers