1. Manuals
  2. Brands
  3. Hitachi Manuals
  4. Projector
  5. CP-X417W(C14-30AWL)
  6. Service manual

Hitachi CP-X417W(C14-30AWL) Service Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

SERVICE MANUAL

Warning
The technical information and parts shown in this
manual are not to be used for: the development,
design, production, storage or use of nuclear, chemical,
biological or missile weapons or other weapons of
mass destruction; or military purposes; or purposes that
endanger global safety and peace. Moreover, do not
sell, give, or export these items, or grant permission for
use to parties with such objectives. Forward all inquiries
to Hitachi Ltd.
Be sure to read this manual before servicing. To assure safety from fi re, electric shock, injury, harmful
radiation and materials, various measures are provided in this Hitachi Multimedia LCD Projector.
Be sure to read cautionary items described in the manual to maintain safety before servicing.
1. When replace the lamp, to avoid burns to your fi ngers. The lamp becomes too hot.
2. Never touch the lamp bulb with a fi nger or anything else. Never drop it or give it a shock. They may
cause bursting of the bulb.
3. This projector is provided with a high voltage circuit for the lamp. Do not touch the electric parts of
power unit (circuit) and power unit (ballast), after turn on the projector.
4. Do not touch the exhaust fan, during operation.
5. The LCD module assembly is likely to be damaged. If replacing to the LCD LENS/PRISM assembly,
do not hold the FPC of the LCD module assembly.
6. Use the cables which are included with the projector or specifi ed.
1. Features ------------------------------------------------------ 2
2. Specifi cations ----------------------------------------------- 2
3. Names of each part ---------------------------------------- 3
4. Adjustment --------------------------------------------------- 6
5. Troubleshooting ------------------------------------------ 13
6. Service points --------------------------------------------- 24
7. Wiring diagram -------------------------------------------- 41
SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT.
Multimedia LCD Projector
YK
CP-X417W(C14-30AWL)
Caution
Service Warning
Contents
8. Disassembly diagram ----------------------------------- 53
9. Replacement parts list ---------------------------------- 61
10. RS-232C communication ------------------------------ 62
11. Block diagram --------------------------------------------- 77
12. Connector connection diagram ----------------------- 78
13. Basic circuit diagram ------------------------------------ 79
October 2007
No.0597E

Advertisement

Table of Contents
loading

Related Manuals for Hitachi CP-X417W(C14-30AWL)

Summary of Contents for Hitachi CP-X417W(C14-30AWL)

  • Page 1: Table Of Contents

    Be sure to read this manual before servicing. To assure safety from fi re, electric shock, injury, harmful radiation and materials, various measures are provided in this Hitachi Multimedia LCD Projector. Be sure to read cautionary items described in the manual to maintain safety before servicing.

  • Page 2: Features

    CP-X417W (C14-30AWL) 1. Features • High Brightness • Rich Connectivity • Multiple Screens • Low Noise • Powerful Sound • Cable-Free Presentations • Remote Control Via Your Web Browser • Stand Alone Presentations 2. Specifications Drive system TFT active matrix Liquid crystal Panel size...

  • Page 3: Names Of Each Part

    CP-X417W (C14-30AWL) 3. Names of each part ● Projector HOT! (2) (3) Projector (1) Lamp cover The lamp unit is inside. (2) Focus ring (3) Zoom ring (11) (4) Control panel (5) Elevator buttons (x 2) (10) (6) Elevator feet (x 2) (7) Remote sensor (8) Lens (9) Lens cover...

  • Page 4: Control Panel

    CP-X417W (C14-30AWL) Control panel (1) STANDBY/ON button (2) INPUT button (3) MENU button It consists of four cursor buttons. (4) POWER indicator (5) TEMP indicator (6) LAMP indicator Rear panel (1) AUDIO IN1 port (10) COMPONENT (2) AUDIO IN2 port (Y, C ) ports (3) AUDIO OUT port...

  • Page 5: Remote Control

    CP-X417W (C14-30AWL) Remote control (1) VIDEO button (2) COMPUTER button COMPUTER VIDEO SEARCH (10) BLANK (3) SEARCH button ASPECT AUTO (12) MAGNIFY HOME PAGE UP VOLUME (4) STANDBY/ON button (14) PAGE DOWN MUTE (11) (15) (5) ASPECT button FREEZE MY BUTTON KEYSTONE (16) (13)

  • Page 6: Adjustment

    CP-X417W (C14-30AWL) 4. Adjustment 4-1 Before adjusting 4-1-1 Selection of adjustment When any parts in the table 4-1 are changed, choose the proper adjusting items with the chart. Table 4-1: Relation between the replaced part and adjustment Adjustment Replaced White Color Flicker Ghost...
  • Page 7 CP-X417W (C14-30AWL) 4-2 Flicker adjustment (V.COM adjustment) Test pattern for the adjustment Adjustment procedure 1. Use DAC-P - V.COM - R: in the FACTORY MENU to adjust so that the flicker at the center of the screen is less than the flicker at the periphery. (When the flicker is about the same across the whole screen, adjust so that the flicker at the center 128/255...
  • Page 8 CP-X417W (C14-30AWL) 4-5 E-POS adjustment (vertical bars adjustment 2) Test pattern for the adjustment Adjustment procedure 1. Make this adjustment after completing the ad- justment in the section 4-4. 2. Use DAC -P - E-POS - R in the FACTORY MENU and use it so that vertical bars are minimized.
  • Page 9 CP-X417W (C14-30AWL) 4-7 Color uniformity adjustments Preparations 1. Perform these adjustments after the adjustments 5. Adjustment point No.1 should not be adjusted, described in the section 4-6. because it controls the brightness of the entire 2. Make a color uniformity adjustments for the screen.
  • Page 10 CP-X417W (C14-30AWL) Adjustment procedure 1 (When a color differential meter is used) Note: Since excessive correction may lead to a 1. First adjust the [MID-1] tone [G:]. correction data overview during internal 2. Select adjustment point [No.2][G:]. calculations, use the following values for When the background is not [G] monochrome, reference.
  • Page 11 CP-X417W (C14-30AWL) Adjustment procedure 2 (visual inspection) 1. First adjust [MIN] tone [G:]. Adjustment technique: 2. Select [No.2] [G:]. First, adjust [B:] of the point whose color is to If the background is [G] monochrome, press the be adjusted so that it approximates that of [ENTER] key on the remote control to switch to [No.1].

  • Page 12: Adjusting The Zoom And Focus

    CP-X417W (C14-30AWL) 4-8 Adjusting the zoom and focus Zoom ring Focus ring 1. Use the zoom ring to adjust the screen size. 2. Use the focus ring to focus the picture.

  • Page 13: Troubleshooting

    CP-X417W (C14-30AWL) 5. Troubleshooting Check points...
  • Page 14 CP-X417W (C14-30AWL) Power can not be turned on *: Be sure to unplug the power cord before measuring resistance. voltage supplied at pins (8) Measure resistance* 0Ω and (13) of E800 on the PWB between pins (8) and (13) of PWB assembly MAIN assembly MAIN in standby E800.
  • Page 15 CP-X417W (C14-30AWL) Lamp does not light *: Be sure to unplug the power cord before measuring resistance. What is the state of Light LAMP indicator DK03 during operation? Is the LAMP installation install the Lamp correct? Not light Is the voltage at “L”...
  • Page 16 CP-X417W (C14-30AWL) Picture is not displayed when the RGB signal is input Confirm the splash screen the LCD Panels CPC36 connector and the user menu displayed connection to the MAIN correctly? board. PWB assembly MAIN LCD/Lens prism assembly Is the picture from RGB out port displayed correctly PWB assembly MAIN...
  • Page 17 CP-X417W (C14-30AWL) No sound Check at operating mode (Make sure the state of MUTE , Volume and AUDIO-SPEAKER) Disconnect the speaker from the infinity PWB assembly Main and Speaker measure its resistance. about 8 PWB assembly Main Can not control to RS-232C The check after parts change 1.
  • Page 18 CP-X417W (C14-30AWL) Image of the WIRELESS NETWORK UNIT is not displayed on the screen. Is the MIU port selected ? Change the port to MIU Wired ? Does the WIRELESS SD Insert the WIRELESS SD card mount on projector card into the SD card slot correctly? Is cable Connect cable...
  • Page 19 CP-X417W (C14-30AWL) The WIRELESS NETWORK UNIT can not be communicated to PC. Did you check above P.14 and P.18 ? Check above P.14 and P.18 Once AC power off, and wait When you check until LED changes blinking to connection, LED on lighting after power on.
  • Page 20 CP-X417W (C14-30AWL) Can you connect via PWB assembly WIRELESS wired LAN ? Change PC’s IP address setting to “192.168.1.N” (N:1 to 9 or 11 to 254) And check wired LAN connection when wireless LAN is disabled. Change the WIRELESS NETWORK UNIT and your PC’s wireless channel Are there any other setting differ to other PC or something,...
  • Page 21 CP-X417W (C14-30AWL) Time in not correctly displayed. DATE AND TIME is displayed as 2000/1/1 0:00 in INFORMATION on NETWORK menu. Is TIME Set the time in DIFFERENCE on Set the time. Was the time set before? DATE AND TIME on INFORMATION correct ? NETWORK menu.
  • Page 22 CP-X417W (C14-30AWL) Select “INFORMATION” Fig.1 Confirm Configuration Reset Key Fig.2 Reset Wireless Network Unit settings...
  • Page 23 CP-X417W (C14-30AWL) Fig.3 Wireless Network Unit Configuration Fig.4 Execute ipconfig...

  • Page 24: Service Points

    CP-X417W (C14-30AWL) 6. Service points 6-1 Lead free solder [CAUTION] This product uses lead free solder (unleaded) to help preserve the environment. Please read these instructions before attempting any soldering work. CAUTION Always wear safety glasses to prevent fumes or molten solder from getting into the eyes. Lead free solder can splatter at high temperatures (600˚C).
  • Page 25 Therefore, regarding these parts, you can either replace part, LCD/Lens prism assembly, or send the whole unit LCD/Lens prism assembly back to HITACHI, where we will replace the malfunctioning part, recondition the device and send it back to you.
  • Page 26 CP-X417W (C14-30AWL) (3) Remove the screw and detach the shield bracket. You don’t have to detach the PWB assembly Keypad and Network unit. Remove this screw PWB assembly Keypad Wireless unit (4) Disconnect the LCD panel flexible cables and unscrew PWB assembly MAIN to make it free. Remove this screw Remove 2 screws Flexible cables of LCD panel...
  • Page 27 CP-X417W (C14-30AWL) 3. Maintenance point Actual formation Each color part has same construction.By using swab and air duster, you can easily remove dust from panel and optical filter. 4. Cleaning the panels and optical filters (1) Turn on the set and lit on the lamp. (2) By using swab and air duster, remove the dust.
  • Page 28 Battery Case 5. Replace a new battery. Battery Replace battery with HITACHI MAXELL, Part No.CR2032 only.Use of another battery may present a risk of fire or explosion. Battery Put a new battery into battery case. Please make sure that the + is facing Case upward.
  • Page 29 If the flower adheres your body or clothes, rinse well with water immediately. • Obey the local laws on disposing the battery. 1. Use the batteries included in this product or two new batteries of the specified type: HITACHI MAXELL, part number LR6 or R6P. Remove the battery cover.

  • Page 30: Air Filter

    CP-X417W (C14-30AWL) 6-5 Air filter WARNING • Before caring, make sure the power switch is off and the power cable is not plugged in, then allow the projector to cool suffi ciently. The care in a high temperature state of the projector could cause an electric shock, a burn and/or malfunction to the projector.
  • Page 31 CP-X417W (C14-30AWL) 6-6 Lamp WARNING HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE ● The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different life- time, and some may burst or burn out soon after you start using them.
  • Page 32 CP-X417W (C14-30AWL) Replacing the Lamp A lamp has a fi nite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after being started using.

  • Page 33: Other Care

    CP-X417W (C14-30AWL) 6-7 Other care WARNING Before caring, make sure the power switch is off and the power cable is not plugged in, and then allow the projector to cool suffi ciently. The care in a high temperature state of the projector could cause a burn and/ or malfunction to the projector.
  • Page 34 CP-X417W (C14-30AWL) 6-8 Notice of AUTO adjustment Use of AUTO adjustment with the image through RGB input optimizes V_POSI, H_POSI, H_SIZE and H_PHASE automatically. In case that projected image has dark tone around its peripheral, AUTO operation sometimes makes artifacts in the image, shifts capture area and so on.
  • Page 35 CP-X417W (C14-30AWL) 6-9 How to inactivate the security functions This projector is equipped with security functions. (1)MyScreen PASSWORD The MyScreen PASSWORD function can be used to prohibit access to the MyScreen function and pre- vent the currently registered MyScreen image from being overwritten. (2)PIN LOCK PIN LOCK is a function which prevents the projector from being used unless a registered Code is input.
  • Page 36 PIN BOX (ID Inquiring Code) 2. Send HITACHI sales company the Inquiring code (10 digits) to inquire the correct PIN code. 3. With the PIN BOX menu displayed, input the correct PIN code. Enter the correct PIN CODE that HITACHI sales company informed.

  • Page 37: Related Messages

    CP-X417W (C14-30AWL) 6-11 Related Messages When the unit’s power is on, messages such as those shown below may be displayed. When any such message is displayed on the screen, please respond as described below. Although these messages will be automatically disappeared around several minutes, it will be reappeared every time the power is turned on.

  • Page 38: Regarding The Indicator Lamps

    CP-X417W (C14-30AWL) 6-12 Regarding the indicator lamps Lighting and flashing of the POWER indicator, the LAMP indicator, and the TEMP indicator have the meanings as described in the table below. Please respond in accordance with the instructions within the table. POWER LAMP TEMP...

  • Page 39: Startup Type

    “1 Level” shows one kind of lamp-message according to the LAMP TIME count. “None” shows no lamp-messages. It is the factory default setting. STARTUP TYPE Select the startup screen type. 1 : shows Hitachi Logo 2 : No Hitachi Logo PJLink Select the PJLink.
  • Page 40 CP-X417W (C14-30AWL) 6-15 Reset of the Network Web password / User ID, Network Control password ATTENTION : Performing this operation initializes the network settings. If the projector has the customized settings in the network, make a note of the network settings to restore them before this operation.

  • Page 41: Wiring Diagram

    CP-X417W (C14-30AWL) 7. Wiring diagram...
  • Page 42 CP-X417W (C14-30AWL)
  • Page 43 CP-X417W (C14-30AWL)
  • Page 44 CP-X417W (C14-30AWL)
  • Page 45 CP-X417W (C14-30AWL)
  • Page 46 CP-X417W (C14-30AWL)
  • Page 47 CP-X417W (C14-30AWL)
  • Page 48 CP-X417W (C14-30AWL)
  • Page 49 CP-X417W (C14-30AWL)
  • Page 50 CP-X417W (C14-30AWL)
  • Page 51 CP-X417W (C14-30AWL)
  • Page 52 CP-X417W (C14-30AWL)

  • Page 53: Disassembly Diagram

    CP-X417W (C14-30AWL) 8. Disassembly diagram M3x8 rear M3x6 M4x6 PWB assembly INPUT obverse reverse REAR T3x10 M3x8...
  • Page 54 CP-X417W (C14-30AWL)
  • Page 55 CP-X417W (C14-30AWL) Notice 1. Detach and attach the upper case. Follow the procedure below to detach and attach the upper case. When disassembling a. Remove the Lamp door. CAUTION The lamp door must be removed before the upper case when disassembling the machine. If the upper case is detached with the lamp door installed, the MAIN board might be damaged.
  • Page 56 CP-X417W (C14-30AWL) When assembling a. Tighten 7 screws on the bottom and 2 screws on the rear after attaching the upper case with the lamp door separated. CAUTION These are not screw holes. Do NOT insert a screw or screwdriver into them to avoid damag- ing the inside.
  • Page 57 CP-X417W (C14-30AWL) 2. Detaching and attaching the Panel Fan Duct assembly When disassembling Remove 3 screws and unhook the panel fan duct assembly as shown in the diagram. T3x12 [above] Release the 5 hooks When assembling (1) Put the thermistor and Air sensor in the correct position on the Panel duct as shown in the diagram. 3.
  • Page 58 CP-X417W (C14-30AWL) 4. Attaching the power unit FAN. Never attach the FAN to the wrong direction. Refer the stamp on the FAN when you attach the power unit FAN. 5. Attaching the exhaust FAN. Never attach the FAN to the wrong direction. Refer the diagram when you attach the exhaust FAN.
  • Page 59 CP-X417W (C14-30AWL) 6. Attaching the power unit. Refer the diagram when you attach the power unit. Pull the AC inlet frame to the outside. Then, attach the power unit. Make sure that the bottom case does not come in contact with AC SW. CAUTION Never use the wrong screws.
  • Page 60 CP-X417W (C14-30AWL) 7. Attaching the Lens prism ASSY. Refer the diagram when you attach the Lens prism ASSY. (2) Attach the LCD prism ASSY inserting the Never touch the LCD to any parts when you top of the Lens to the lens enclosure. attach the LCD prism ASSY.

  • Page 61: Replacement Parts List

    CP-X417W (C14-30AWL) 9. Replacement Parts list PRODUCT SAFETY NOTE : Components marked with a have special characteristics important to safety. Before replacing any of there components, read carefully, the PRODUCT SAFETY NOTICE of this Service Manual. Don't degrade the safety of the projector through improper servicing.

  • Page 62: Rs-232C Communication

    CP-X417W (C14-30AWL) 10. RS-232C communication CONTROL port RS-232C cable (cross) RS-232C port of the projector of the computer - (1) (1) CD RD (2) (2) RD TD (3) (3) TD - (4) (4) DTR GND (5) (5) GND - (6) (6) DSR RTS (7) (7) RTS...
  • Page 63 CP-X417W (C14-30AWL) Requesting projector status (Get command) (1) Send the following request code from the PC to the projector. Header + Command data (‘02H’ + ‘00H’ + type (2 bytes) + ‘00H’ + ‘00H’) (2) The projector returns the response code ‘1DH’ + data (2 bytes) to the PC. Changing the projector settings (Set command) (1) Send the following setting code from the PC to the projector.

  • Page 64: Command Control Via The Network

    CP-X417W (C14-30AWL) Command Control via the Network Communication Port The following two ports are assigned for the command control. TCP #23 TCP #9715 Command Control Settings Confi gure the following items form a web browser when command control is used. Port Settings Click the [Enable] check box to open [Network Port open...

  • Page 65: Command Format

    CP-X417W (C14-30AWL) Command Format [TCP #23] 1. Protocol Consist of header (7 bytes) + command data (6 bytes) 2. Header BE + EF + 03 + 06 + 00 + CRC_low + CRC_high CRC_low: Lower byte of CRC fl ag for command data CRC_high: Upper byte of CRC fl...
  • Page 66 CP-X417W (C14-30AWL) Decreasing the projector setting value (Decrement command) (1) The PC sends the following decrement code to the projector. Header + Command data (‘05H’ + ‘00H’ + type (2 bytes) + ‘00H’ + ‘00H’) (2) The projector decreases the setting value on the above setting code. (3) The projector returns the response code ‘06H’...
  • Page 67 CP-X417W (C14-30AWL) 7. Reply Data The connection ID (the data is same as the connection ID data on the sending data format) is attached to the Network control commands reply data. ACK reply: ‘06H’ + ‘xxH’ NAK reply: ‘15H’ + ‘xxH’ Error reply: ‘1CH’...
  • Page 68 CP-X417W (C14-30AWL) Command data chart / Network command table Command Data Names Operation Type Header Action Type Setting Code Power Turn off BE EF 06 00 2A D3 01 00 00 60 00 00 Turn on BE EF 06 00 BA D2 01 00 00 60...
  • Page 69 CP-X417W (C14-30AWL) Command Data Names Operation Type Header Action Type Setting Code User Gamma Pattern BE EF 06 00 FB FA 01 00 80 30 00 00 9 steps gray scale BE EF 06 00 6B FB 01 00 80 30 01 00 15 steps gray scale BE EF...
  • Page 70 CP-X417W (C14-30AWL) Command Data Names Operation Type Header Action Type Setting Code COLOR TEMP GAIN B BE EF 06 00 8C F5 02 00 B3 30 00 00 Increment BE EF 06 00 EA F5 04 00 B3 30 00 00 Decrement BE EF 06 00...
  • Page 71 CP-X417W (C14-30AWL) Command Data Names Operation Type Header Action Type Setting Code OVER SCAN BE EF 06 00 91 70 02 00 09 22 00 00 Increment BE EF 06 00 F7 70 04 00 09 22 00 00 Decrement BE EF 06 00 26 71...
  • Page 72 CP-X417W (C14-30AWL) Command Data Names Operation Type Header Action Type Setting Code FRAME LOCK – TURN OFF BE EF 06 00 3B C2 01 00 50 30 00 00 COMPUTER1 TURN ON BE EF 06 00 AB C3 01 00 50 30 01 00 BE EF...
  • Page 73 CP-X417W (C14-30AWL) Command Data Names Operation Type Header Action Type Setting Code VOLUME-Video BE EF 06 00 31 CD 02 00 61 20 00 00 Increment BE EF 06 00 57 CD 04 00 61 20 00 00 Decrement BE EF 06 00 86 CC 05 00...
  • Page 74 CP-X417W (C14-30AWL) Command Data Names Operation Type Header Action Type Setting Code HDMI-AUDIO BE EF 06 00 AE C6 01 00 40 20 01 00 BE EF 06 00 5E C6 01 00 40 20 02 00 BE EF 06 00 0D C7 02 00 40 20...
  • Page 75 CP-X417W (C14-30AWL) Command Data Names Operation Type Header Action Type Setting Code MyScreen LOCK TURN OFF BE EF 06 00 3B EF 01 00 C0 30 00 00 TURN ON BE EF 06 00 AB EE 01 00 C0 30 01 00 BE EF 06 00...
  • Page 76 CP-X417W (C14-30AWL) Command Data Names Operation Type Header Action Type Setting Code MY BUTTON-2 COMPUTER1 BE EF 06 00 C6 32 01 00 01 36 00 00 COMPUTER2 BE EF 06 00 06 30 01 00 01 36 04 00 HDMI BE EF 06 00...

  • Page 77: Block Diagram

    CP-X417W (C14-30AWL) 11. Block diagram...

  • Page 78: Connector Connection Diagram

    CP-X417W (C14-30AWL) 12. Connector connection diagram...

  • Page 79: Basic Circuit Diagram

    CP-X417W (C14-30AWL) 13. Basic circuit diagram Parts with hatching are not mounted. CONFIDENTIAL FRONT-56 FRONT-38 IR02 IR01 KSM-2003LM2EL KSM-2003LM2EL Vout Vout CR04 CR01 100p-C 100p-C 1005 1005 CR05 CR02 1.0/10 1.0/10 APRC03 APRC02 APRC01 APRC04 PWB assembly REMOTE...
  • Page 80 CP-X417W (C14-30AWL) CONFIDENTIAL TEMP DH02 SML-210VT RH23 QH23 DTC114EE 1005 EH01 ZH-12H RH01 APH01 LED GREEN RH02 LAMP APH02 DH03 LED RED SML-210VT RH03 APH03 RH24 LED TEMP QH24 RH04 APH04 1005 DTC114EE LED LAMP RH05 APH05 KEYI-0 RH06 APH06 KEYI-1 RH07 APH07...
  • Page 81 CP-X417W (C14-30AWL) CONFIDENTIAL POWER UNIT (BALLAST) 1...
  • Page 82 CP-X417W (C14-30AWL) CONFIDENTIAL POWER UNIT (BALLAST) 2...
  • Page 83 CP-X417W (C14-30AWL) CONFIDENTIAL POWER UNIT CIRCUIT...
  • Page 84 CP-X417W (C14-30AWL) CONFIDENTIAL EC02 YLC21-3264V Audio-R APC06 LC04 1608 APC07 APC10 LC08 NFL21SP407X1C3 2125 APC05 Audio-L LC05 APC24 EC07 APC23 ZH-13V 1608 APC09 C-Video LC07 NFL21SP407X1C3 GND1 2125 APC25 Y(S-Video) APC26 C-Video APC04 LC03 NFL21SP407X1C3 C(S-Video) 2125 GND1 APC27 APC08 LC06 NFL21SP407X1C3 APC28...
  • Page 85 CP-X417W (C14-30AWL) CONFIDENTIAL +3.3VPW I201 I201 PW190B-10L DIGITAL INPUT PORT PERIPHERALS PW190B-10L CH0CK HDMI_CLK IN0CLK IN0CLP CH0CP I201 CH0PE NC-D13 HDMI_DE IN0PEN IN0CST CH0CS DISPLAY PORT PW190B-10L R2C4 R2K0 CH0VB NC-E18 IN0VBI R2C5 CH0AH NC-D14 DCLK IN0AHS 1005 R2C6 CH0HS NC-A12 DCLKOUT 1005...
  • Page 86 CP-X417W (C14-30AWL) CONFIDENTIAL I201 RESETN PW190B-10L R200 L251 JUMPER R R203 1.0k 1005 1608 AC15 AC15 R217 1005 AE16 AE16 65mA Q201 AF16 AF16 DTC114EUA 2010 AC16 AC16 R201 AD15 AD15 EMU-RESET R218 AE15 AE15 2010 AC14 N251 AC14 2010 AF15 L216 AF15...
  • Page 87 CP-X417W (C14-30AWL) CONFIDENTIAL +6.6V +3.3V R395 R394 1005 1005 MOUSE R305 Q391 R393 2SC5343UFG S309 CPU-RESET 1005 100 1 R303 I301 SKHHLMA010 PWRC RN5VD26C 1005 1005 I392 RESETN TC7SZ32FU R306 Q301 C303 SRC1202EF 0.1/10 IN_B RC_EN38 1005 1005 I391 RC-38 IN_A JUMPER R TC7SZ08FU...
  • Page 88 CP-X417W (C14-30AWL) CONFIDENTIAL R8FF C826 R825 R826 1000p 10k-1% 10k-1% 470 1 1005 1005 1005 1005 I801 C827 SI-3010KM D8F1 0.01/16 UDZS3.0B 1005 15.5V-Panel R815 I802 I805 R823 MM1663DHBE MM1663DHBE 1.2k E8F1 L8F3 2125 1005 SH-02H 1608 FIL-SW GND1 R817 I804 MP2361DK L8F4...
  • Page 89 CP-X417W (C14-30AWL) CONFIDENTIAL JUMPER R L401 I401 2518 L3E07111KOA +3.3VP +1.0V VDD10-D13 L402 C421 VDD10-D14 VDD10-D15 HRESETO CHHRST 2.2/6.3 2518 I401 VDD10-E13 VRESETO CHVRST L3E07111KOA VDD10-E14 HPLL CHHPLL C422 0.01/16 VDD10-F17 CLP1 CHCP1 R442 VDD10-F4 CLP2 CHCP2 R1OUT0 CHR100 R401 1005 VDD10-F5 SHENB...
  • Page 90 CP-X417W (C14-30AWL) CONFIDENTIAL C14HWL R Panel Part +3.3VP +15.5V 0 ohm R 0 ohm R SHCLKR SHCLKR 0 ohm R ENBXR1 ENBXR1 DXOUTR R552 0 ohm R DXOUTR CLXOUTR P501 CLXOUTR 1005 54104-36HUp DYOUT APR36 DYOUT CLYOUT RLCCOM CLYOUT LCCOM ENBY1 Q501 APR35...
  • Page 91 CP-X417W (C14-30AWL) CONFIDENTIAL C14HWL G Panel Part +3.3VP +15.5V SHCLKG SHCLKG 0 ohm R ENBXG1 ENBXG1 DXOUTG R652 0 ohm R DXOUTG CLXOUTG P601 CLXOUTG 1005 54104-36HUp DYOUT APG36 DYOUT CLYOUT GLCCOM CLYOUT LCCOM ENBY1 APG35 ENBY1 Q601 ENBY2 DTC114EE ENBY2 VDDY APG34...
  • Page 92 CP-X417W (C14-30AWL) CONFIDENTIAL C14HWL B Panel Part +3.3VP +15.5V SHCLKB SHCLKB 0 ohm R ENBXB1 ENBXB1 DXOUTB R752 0 ohm R DXOUTB CLXOUTB P701 CLXOUTB 1005 54104-36HUp DYOUT APB36 DYOUT CLYOUT BLCCOM CLYOUT LCCOM ENBY1 Q701 APB35 ENBY1 DTC114EE ENBY2 ENBY2 VDDY APB34...
  • Page 93 CP-X417W (C14-30AWL) CONFIDENTIAL LV01 2518 JUMPER R GND1 RV48 RV49 DSUB1_B CHB1 +3.3V RV50 1005 CHG1 DSUB1_G DSUB1_R 1005 CHR1 1005 DSUB1_H RVA6 DSUB1_V RV91 DSUB1_SOG 1005 ES04 1005 ZH-11V GND1 APW02 RV46 QV04 APW01 RV80 2SC5343UFG RV61 1005 Analog Red (Wireless) LV05 HV09 1005...
  • Page 94 CP-X417W (C14-30AWL) CONFIDENTIAL LS01 RS05 2518 JUMPER R RS06 1005 RS04 GND1 1005 1005 AP1DG QS02 SRC1202EF ES01 3114-15FA APCL HS10 SC200JT SYNC AP1V 2125 VCLK HS08 AP1B SC200JT PLUG RS23 2125 AP1H CS06 1005 10/6.3 HS07 AP1G 2125 SC200JT RS22 2125 APDA...
  • Page 95 CP-X417W (C14-30AWL) CONFIDENTIAL +15.5V +18.9V Sheet 4 A_VCC CA68 Sheet 4 A_GND 47/25 MVK/SKV RA80 A_GND 1005 Sheet 1 SP_OFF RA19 CA71 4.7k Sheet 1 POWER5 1005 1.0/10 GND1 QA07 IA03 2SC5343UFG RA48 TK11185CSC Vcont 1005 RA78 1005 Max 1mA Vout LA01 +8.5V...
  • Page 96 CP-X417W (C14-30AWL) CONFIDENTIAL IK21 RRX6000-0702L VSS1 /RST OSC1 PTA0 XK25 6.00MH OSC2 PTA1 RK30 VREG PTA2 RK35 1005 IK01 ADM202EARNZ PTA3 1005 PTD0 PTE0/TCLK PTD1 PTE2/TCH1 T1OUT PTD2 PTA4 R1IN PT03 PTA5 R1OUT PTD4 PTA6 RK27 T1IN RK04 PTE1/TCH0 PTA7 RK34 RK23 100 1...
  • Page 97 CP-X417W (C14-30AWL) IG12 MM1661JHBE CG95 IG11 Cont MM1663DHBE 470p CG92 1005 NC-6 Cont 470p I2CCLK 1005 NC-7 NC-2 I2CDAT NC-6 HPD_RST Vout JUMPER NC-7 NC-2 LG01 3.3V-CPU LG05 Vout 2125 2125 RG03 +6.6V RG02 HDMI_V RG01 1005 HDMI_H 1005 HDMI_DE 1005 CG62 CG11...
  • Page 98 CP-X417W (C14-30AWL) CT89 RT55 RT56 1000p 10k-1% 10k-1% 1005 1005 1005 CT61 CT62 CT90 18p-C 15p-C 0.01/16 RT01 1005 1005 1005 RESETN RT02 RT04 1005 GND1 RESETK RT03 1005 1005 RT05 1.0k 1.0k 1.0M IT01 IT02 1005 1005 MP2361DK MISC PW600-10L GND1 IT01...
  • Page 99 CP-X417W (C14-30AWL) CONFIDENTIAL DCLKFB DCLK DCKE xDWE xDCAS xDRAS VDVSYNC VDHSYNC DDQM3 DDQM3 VDCLKOUT DDQM2 DDQM2 VDPCLKIN DDQM1 DDQ31 DDQM1 VDENABLE DDQ31 DDQM0 DDQ30 DDQM0 DDQ30 DDQ29 EMC1 DDQ29 DBA1 SH-04H DDQ28 DBA1 DDQ28 DBA0 DDQ27 DBA0 DDQ27 DDQ26 DDQ26 DDQ25 xDCS0 DDQ25...
  • Page 100 CP-X417W (C14-30AWL) CONFIDENTIAL 3.3VM A23F A17F D31F A23F D31F A22F S29AL032D70TFI030 D30F A22F D30F A21F A16F A17F D29F A21F D29F A20F D28F A20F D28F A19F A15F D27F A19F BYTE# D27F A18F D26F A18F D26F A17F A14F D25F A17F Vss-46 D25F A16F D24F A16F...
  • Page 101 CP-X417W (C14-30AWL) CONFIDENTIAL DDQ31 DDQ31 DDQ30 DDQ30 DDQ29 DDQ29 3.3VM DDQ28 RM75 DDQ28 DDQ27 DDQ27 1005 DDAA12 DDQ26 DDA12 DDQ26 DDQ25 DDAA11 DDA11 Vcc-1 Vss-54 DDQ25 RM76 DDAA10 RM80 RM79 DDQ24 DDA10 DDQ24 DDQ23 DDAA9 DDQ16 DDQ31 DDA9 DQ15 DDQ23 GND1 2010 DDAA8...
  • Page 102 CP-X417W (C14-30AWL) CONFIDENTIAL RM131 3.3RTC RM132 3.3VM RM147 xINTB 1005 R2051S02-E2 CM188 NC-1 RM304 9.0p-C 1005 +3_BTRY 1005 1SS355 CLKOUT NC-14 RM137 SCL0 OSCIN RM138 1005 SDA0 OSCOUT 1005 NC-6 NC-11 EBM2 RM152 CM189 NA87611 3.3VM VDCC INTR 1005 CM60 9.0p-C 1005 0.1/10...
  • Page 103 CP-X417W (C14-30AWL) CONFIDENTIAL 3.3VM SCL1 SDA1 LRCKI BCKI xIRQ7 xIRQ7 xIRQ6 xIRQ6 xIRQ5 xIRQ5 xIRQ4 xIRQ4 A31F A31F A30F A30F A29F A29F A28F A28F A27F A27F A26F A26F A25F A25F A24F A24F xBSTACK xBSTREQ xBREQ xERR xRAMBOOT VCVSYNC VCHSYNC VCDCLKIN VDVSYNC VDHSYNC VDACSYNC_T...
  • Page 104 CP-X417W (C14-30AWL) CONFIDENTIAL QMR4 SSM6J25FE 3.3VM IM11 LM11 R5520H001B-T1 HPWREN QMR1 SLF6028 MCH3309-TL 3.3VM HOVERCUR RM419 xSDIOPWRON 1.5K 1005 GND1 UBA-4R-D10T-1 RM400 UDM1 RM401 1005 UDP1 GND1 1005 RM192 G1 G2 G3 2125 SDAT3 SDAT3 SDAT2 SDAT2 SDAT1 SDAT1 GND1 SDAT0 SG5S009V1D2 SDAT0...
  • Page 105 CP-X417W (C14-30AWL) CONFIDENTIAL CMU9 RMU4 RMU5 0.001 10K-1% 10K-1% 1005 1005 CMU8 0.01 GND1 IM75 MP2361DK GND1 Fixed 1.4MHz SW Freq. GND1 RM241 LMT5 RM244 3.3VM 2125 CMU3 2125 7E06NG LMU4 0.01 FMS1 CM124 +15V 0.1/10 2125 1005 miniSMDC050F CMU1 CMU2 CMU4 CMU5...
  • Page 106 CP-X417W (C14-30AWL) CONFIDENTIAL 3.3VM CLK20MO D31F D31F D30F D30F D29F D29F D28F D28F D27F D27F D26F D26F D25F D25F D24F D24F D23F D23F D22F D22F D21F D21F D20F D20F D19F D19F D18F D18F D17F D17F D16F D16F D15F CM166 D15F D14F 1005 D14F...
  • Page 107 CP-X417W (C14-30AWL) Basic circuit diagram list PWB assembly REMOTE PWB assembly MAIN 9 PWB assembly KEYPAD PWB assembly MAIN 10 POWER UNIT BALLAST 1 PWB assembly MAIN 11 POWER UNIT BALLAST 2 PWB assembly MAIN 12 POWER UNIT CIRCUIT 1 PWB assembly MAIN 13 PWB assembly INPUT PWB assembly MAIN 14...
  • Page 108 CP-X417W YK No.0597E QR73751 Printed in Japan (JE)

Table of Contents