Copper Ethernet Ports - Siemens RUGGEDCOM M969 Installation Manual

Table of Contents

Advertisement

Chapter 3
Communication Ports
Figure 15: Port Assignment (RJ-45 Connectors Shown)
1. RJ-45 Copper Ethernet Ports    2. Fiber Optic Ethernet Ports
CONTENTS
Section 3.1, "Copper Ethernet Ports"
Section 3.2, "Fiber Optic Ethernet Ports"
Section 3.1

Copper Ethernet Ports

The RUGGEDCOM M969 supports eight 10/100Base-TX Ethernet ports that allow connection to standard Category
5 (CAT-5) unshielded twisted-pair (UTP) cables with RJ45 male connectors or M12 male connectors. The RJ45/M12
connectors are directly connected to chassis ground on the device and can accept CAT-5 shielded twisted-pair
(STP) cables.
WARNING!
Electric shock hazard – risk of serious personal injury and/or equipment interference. If shielded cables
are used, make sure the shielded cables do not form a ground loop via the shield wire and the RJ45/
18
1
2
RUGGEDCOM M969
Installation Guide
Copper Ethernet Ports

Advertisement

Table of Contents
loading

Table of Contents