Chapter 2: Configuration; Meshmanager Configuration; Configuring The Camera To Use A Static Ip Address Via A Laptop; Procedure 2-1 Configuration Using A Laptop - Motorola MOTOMESH 1.2 Setup And Configuration Manual

Chapter 2: Configuration

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
This chapter describes how to configure the Sony Camera for use with the Motorola MOTOMESH
MeshManager Application Suite.

MeshManager Configuration

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
The IP Setup Program that is referred to in the Sony RealShot Manager Guide
does not work in the Motorola MOTOMESH network environment. Please use the
IP configuration instructions provided for use with the Motorola MeshManager
application as described in the sections below.
Configuring the Camera to use a Static IP Address via a
Laptop
The procedure below describes how to configure the Sony camera to use a static IP Address using a
laptop.
Procedure 2-1 Configuration Using a Laptop
To initially configure the camera you will need a laptop and cross-over Ethernet cable.
1
On your laptop, navigate to your Local Area Connection Properties screen.
2
6881011Y68-B October 2006
.
.
.
.
.
.
2-1
Chapter
2