Argo Softy Operating Instructions Manual

Argo Softy Operating Instructions Manual

Local
Hide thumbs Also See for Softy:

Advertisement

EN
PORTABLE AIR CONDITIONER (LOCAL)
OPERATING INSTRUCTIONS
Read the instructions carefully before operating the appliance or carrying out maintenance work.
Observe all the safety instructions; failure to observe the instructions may lead to accidents and/or
damage. Store these instructions in a safe place for future reference.
V 10/16
15

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Softy and is the answer not in the manual?

Questions and answers

Summary of Contents for Argo Softy

  • Page 1 PORTABLE AIR CONDITIONER (LOCAL) OPERATING INSTRUCTIONS Read the instructions carefully before operating the appliance or carrying out maintenance work. Observe all the safety instructions; failure to observe the instructions may lead to accidents and/or damage. Store these instructions in a safe place for future reference. V 10/16...
  • Page 2 GENERAL OPERATING AND SAFETY INSTRUCTIONS  This appliance is a portable air conditioner designed for domestic use.  Only use this air conditioner as described in this manual.  Ensure that the required voltage and frequency (220-240 V/50 Hz) match the available power source. ...
  • Page 3  This air conditioner can be used by children of 8 years or older and by persons with reduced physical, sensory and mental abilities, or lacking the necessary experience and knowledge, provided they are supervised or instructed on its use by a person responsible for their safety, so that they are fully aware of the attendant risks.
  • Page 4 WARNING! In the event of an anomaly, switch the appliance off and unplug from the socket. Do not dismantle or attempt to repair or modify the product. In the event of a malfunction, contact the service centre directly. WARNING!  Do not expose the air conditioner to direct sunlight, as the colour of the materials may change;...
  • Page 5: Description Of The Appliance

    Min/max operating limits (internal temperature) Cooling: 16 °C DB / 35 °C DB Heating (Softy plus): 5 °C DB / 27 °C DB Dehumidification: 16 °C DB / 35 °C DB Cooling mode room temperature adjustment range: 16 °C DB / 32 °C DB...
  • Page 6: Appliance Start-Up

    APPLIANCE START-UP Open the packaging and pull out the box. Remove the product and the other elements supplied (illustrated in the box below). Type-AAA batteries for LCD remote control. remote control. Round fitting (1) for positioning between Flexible pipe. End fitting for window (2). the air discharge outlet and the flexible pipe.
  • Page 7 3. Connect the end part of the flexible pipe to the round 4. Open the windows and lock one of the two leaves fitting for the window (2). with the handle. The drainage tube can be compressed to minimum 45 Place the end fitting against the fixed leaf of the mm and extended to maximum 1500 mm.
  • Page 8: How To Use The Appliance

    HOW TO USE THE APPLIANCE This appliance can be used for SOFTY cooling, heating (only model SOFTY PLUS), dehumidification and ventilation. When switching between modes, the fan continues to turn but the compressor stops: the compressor will re-start after 3 minutes.
  • Page 9 The temperature cannot be adjusted. HOW TO ELIMINATE CONDENSATE Cooling & Heating (Softy plus) This appliance automatically vaporises condensate in the cooling and heating mode. Ensure that when the unit is operating in cooling and heating mode, the rubber caps closing the drainage holes on the rear of the appliance are properly positioned.
  • Page 10: Remote Control Operation

    REMOTE CONTROL OPERATION Insert the batteries into the remote control and make sure the poles match. Only use type-AAA 1.5 V batteries. Remove the batteries if the remote control is not used for a month or longer. Do not attempt to recharge the batteries. Replace all batteries at the same time.
  • Page 11: On/Off Button

    (3)MODE SELECTION BUTTON (MODE) Press this button to select the various operating modes, according to the following sequence: Cooling (Cool) → Dehumidification (Dry) → Heating (Heat) (enabled only on model Softy plus) → Ventilation (Fan Only) → Auto (4) SCREEN BUTTON Used for switching the LCD on or off.
  • Page 12: Care And Maintenance

    2)Timer-off (automatic switch-off) When the appliance is running in COOL mode, this function is used to set the delay after which the unit switches off. Remote control: Press TIMER. The T-OFF and H icons light up. Press the + and - buttons within 5 seconds to set the delay.
  • Page 13 2. Cleaning the casing. Use a damp and soft cloth to clean the outer surface of the appliance. Do not use excessively hot water, solvents, petrol or other aggressive chemical compounds, talcum powder or brushes: these may damage the surface or colour of the casing. Remove any stains using lukewarm water with a little neutral detergent.

This manual is also suitable for:

Softy plus

Table of Contents