Safety precautions........4 Warning on invasion of privacy....... 5 What’s Included..........6 T11 Diagram..........7 Before Using Your Conbrov T11 Camera..8-11 How to Use Your Conbrov T11 Camera..12-14 1.Turning the Camera On/Off.....12 2.How to Record a Video ......12-13 3.How to Switch Into Night Vision ....14 4.How to Play the Video ......14...
Part1 Before First Use Charging the camera Before the first use, charge the camera for about three to four hours via your PC or USB charger (we recommend using the "5V/1A" power adapter) Yellow indicator Yellow indicator Formatting the microSD card Before the first use, format the microSD card to FAT32 format (applicable to Windows system ONLY).
Page 4
Part1: Before First Use Resetting the camera If the camera malfunctions for any reason, reset it with the included pin. A small paperclip can also be used.
Part 2 Quick Guide A.Install the microSD Card B.Turn On/Off ON lights up blue and the camera is in standby mode OFF flashes alternating red and blue and then turns off D.Play The Video C.Record A Video 2S power on Record a Video flash 3 times blue USB2.0...
Safety precautions Read this instruction manual carefully before using the camera. It contains important information for your safety as well as operating and maintenance instructions. Follow all safety precautions in order to prevent damage due to improper use of the camera. Keep this user manual carefully for future use.
Warning on invasion of privacy The camera should be used for legal purpose only. Follow the laws of your country. Recording and circulating an image of an individual may constitute an infringement of their privacy for which you could be liable. Ask for authorization before filming individuals, particularly if you want to keep your recordings and/or circulate images on the Internet or any other medium.
Before Using Your Conbrov T11 Camera 1. Charging your camera Yellow indicator Steady yellow Charging Fully charged Low power Flashing blue and red (1) The camera power must be off before charging. (2) Plug the USB cable both in the camera and in a computer USB port or a 5V/1A adaptor (not included).
Page 11
Before Using Your Conbrov T11 Camera Caution! Format the microSD before use. Doing this, however, will remove all data from the card. Make sure to back up any data before formatting (applicable to Windows system ONLY) The Camera records video only when microSD is installed.
Before Using Your Conbrov T11 Camera 3.Setting the date and time Turn on the camera and connect it to PC with the included USB cable, after about 12 seconds, the disc icon will appear on your computer, then please open SETTIME.TXT Note:Please record a video first before setting the date and time.
Page 13
Before Using Your Conbrov T11 Camera Note: If you cannot find the file SETTIME.TXT after opening the microSD on the computer, please record a video clip to activate the card and set the date and time again. The date and time will remain accurate unless the battery has been depleted for long time.
How to Use Your Conbrov T11 Camera 1.Turning the Camera On/Off (1) Press and hold the to switch the camera on. The LED will light up blue, which indicates that it is in standby mode. (2) Press and hold the to switch the camera off.
Page 15
How to Use Your Conbrov T11 Camera Press again, the blue LED will be on. The device will save the video to the micro SD card and stop recording . 2)Motion Detection Recording (Press after the Camera is powered on)
4.How to Play the Video (1) Connect the T11 camera to computer, press and hold the Power Button for 2 seconds or take out the microSD, insert it into the card reader (not included), then connect the card reader to computer.
LED status Operation LED status indication Steady yellow and turns Charging off once fully charged LED flashes blue for 10 No MicroSD installed seconds, and the camera turns off Blue LED turns off No operation for 60 (camera turns off) seconds Switching off in standby LED flashes alternately...
Technical specifications Dimensions 65x35x28mm Net weight Battery LiPo Stand-by power consumption 10uA PIR detection angle 60 degrees PIR detection distance 5-10 meters Camera angle 120 degrees Max PIR stand-by time 1 year Day time recording power 220mA consumption Max day time recording time 4 hours Night vision recording power 650mA...
FAQs 1.Q: Why is the camera charging so slowly? A: The charging current is too low. Charge with 5V/1A. This camera built-in 1000mah battery. 2.Q:When power on the camera, the blue light flash all the time, and can not record. A:Regarding to your problem, When the blue lights blinking continuously, it shows that it can not read the sd card.
Page 20
FAQs 7.Q:Can it record though the window? A:you can record through the window manually. But Motion recording is not working properly through a window.The window will affect motion sensing as the temperature of the window itself will mask temperature changes occurring outside. 8.
Warranty All products sold by the Conbrov Group are covered by a 12-month full replacement warranty. Happy with it? Share your experience with an Amazon review. Or any questions? Our friendly customer services team are ready to help: support@conbrov.com Contacting us via the above email address is the quickest way to reach our support team.
Page 22
All trademarks or registered trademarks are the property of their respective owners. About Us Conbrov Electron Co., Ltd. founded in 2003 is an innovative technology research company specialized in personal surveillance cameras and on-dash cameras. Conbrov products and technology are patent protected by PCT or U.S. Patent Office.
Need help?
Do you have a question about the T11 and is the answer not in the manual?
Questions and answers