Table of Contents
Advertisement
→ The connection between the cellular
phone and this product cannot be
established.
– Perform the connection process.
→ Of the two cellular phones connected
to this product at the same time, if the
first phone is dialing, ringing or a call is
in progress, dialing cannot be
performed on the second phone.
– When the operation on the first of the
two cellular phones is completed, use
the switch devices key to switch to the
second phone and then dial.
Problems with Application
screen
A black screen is displayed.
→ While operating an application, the
application was ended on the
smartphone side.
– Press
to display the top menu
screen.
→ The smartphone OS may be awaiting
screen operation.
– Stop the vehicle in a safe place and
check the screen on the smartphone.
The screen is displayed, but operation
does not work at all.
→ An error has occurred.
– Park your vehicle in a safe place, and
then turn off the ignition switch (ACC
OFF). Subsequently, turn the ignition
switch to on (ACC ON) again.
– When an Android device is connected,
disconnect the Bluetooth connection
from this product and then reconnect
it.
The smartphone was not charged.
→ Charging stopped because the
temperature of the smartphone rose
due to prolonged use of the
smartphone during charging.
– Disconnect the smartphone from the
cable, and wait until the smartphone
cools down.
→ More battery power was consumed
than was gained from charging.
– This problem may be resolved by
stopping any unnecessary services on
the smartphone.
Sound from AppRadio Mode + of the
Android device cannot be heard from the
speakers of this unit.
→ Depending on the Android device, the
sound from AppRadio Mode + may not
be output from the speakers of this unit.
– Switch to [Smartphone] in the
[AppRadio Mode Sound] settings
(page 89).
Error messages
When problems occur with this product, an
error message appears on the display.
Refer to the table below to identify the
problem, then take the suggested
corrective action. If the error persists,
record the error message and contact your
dealer or your nearest Pioneer service
center.
Common
AMP Error
→ This product fails to operate or the
speaker connection is incorrect; the
protective circuit is activated.
– Check the speaker connection. If the
message fails to disappear even after
the engine is switched off/on, contact
your dealer or an authorized Pioneer
Service Station for assistance.
- 121 -
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the AVH-2330NEX and is the answer not in the manual?
Questions and answers
How to turn display lights down
To dim the display lights on a Pioneer AVH-2330NEX, touch the hard key on any source to bring up the on-screen controls. Then, press the button that appears on the left side to switch the dimmer on or off. When the dimmer is on, the display becomes dimmer. Touch the button again to restore brightness. The sub-display will disappear after a few seconds if not interacted with.
This answer is automatically generated
Applying and reapplying the parking brake still does not give me access to the Bluetooth settings
If you cannot access the Bluetooth settings on your Pioneer AVH-2330NEX after applying the parking brake, ensure that the parking brake is fully engaged. The system disables certain functions, including Bluetooth settings, unless the parking brake is applied. If the settings remain grayed out, check if the parking brake wiring is correctly connected or if there is an issue with the parking brake switch.
This answer is automatically generated
@Mr. Anderson I'm not having any luckies in the parking brake is there another way to go around using the parking brake
preset radio channels
To preset radio channels on the Pioneer AVH-2330NEX:
1. Tune to the desired radio channel using the arrow keys or by directly entering the channel number.
2. Press and hold one of the preset buttons (e.g., number 1 to 6) for a few seconds.
3. The selected channel will be saved to that preset button.
Alternatively, you can use the BSM (Best Stations Memory) function:
1. Touch the BSM option to begin the search.
2. The system will automatically store the six strongest broadcast frequencies under preset buttons 1 to 6.
Note: Using BSM may overwrite existing presets.
This answer is automatically generated