Nokia RH-64 Service Manual page 88

Nokia Customer Care
Page 4–12
SS-54
Alignment jig is used to efficiently assemble the dome-sheet to the
pone's PWB. The jig is made of EDS proof material.
ST-30
Rework stencil to be used together with RJ-51 to rework the Front End
Module (FEM)
ST-32
Rework stencil to be used together with RJ-72 for rework of N7600.
SX-4
SX-4 is a BB5 security device used to protect critical features in tuning
and testing.
SX-4 is also needed together with FPS-10 when DCT-4 phones are flashed.
Company Confidential
Copyright ©2005 Nokia. All Rights Reserved.
Service tools and concepts
Alignment Jig
Rework stencil
Rework stencil for
N7600
Smart card
RH-64
9243363 (Issue 1)