Nokia RH-64 Service Manual page 86

Nokia Customer Care
Page 4–10
MJ-59
MJ-59 is meant for component level troubleshooting.
The jig includes an RF interface for GSM.
PCS-1
The PCS-1 power cable (DC) is used with a docking station, a module jig
or a control unit to supply a controlled operating voltage.
PKD-1
SW security device is a piece of hardware enabling the use of the service
software when connected to the parallel (LPT) port of the PC.
Without the device, it is not possible to use the service software.
Printer or any such device can be connected to the PC through the device
if needed.
RJ-51 PA
To be used with ST-30!
RJ-72
To be used with rework stencil ST-32.
Company Confidential
Copyright ©2005 Nokia. All Rights Reserved.
Service tools and concepts
Module jig
Power cable
SW security device
Rework jig
Rework jig
RH-64
9243363 (Issue 1)