Tilting Range; System Reset; Load Defaults; Gobos - Stairville MH-X50+ Owner's Manual

Tilting range

Press "MODE/ESC" until the display shows "ti27". Using the "Up" and "Down" buttons, you can now
ti27
define the tilting range. Choose between "ti27" (tilting range = 270°), "ti18" (tilting range = 180°) and
"ti 9" (tilting range = 90°). Press "ENTER" to store the setting.

System reset

Press "MODE/ESC" until the display shows "rESt". Press "ENTER" to start a system reset.
rESt

Load defaults

Press "MODE/ESC" until the display shows "LoAd". Press "ENTER" to load the default values for all
LoAd
settings of the device.

Gobos

The following figure shows the available gobos and their numbers.
ö
&
8
# $
' (
MH-X50+ LED Spot
%
)