Panasonic KX-TVM50 Installation Manual page 92

4.1 Guidelines for APT/DPT Integration
Feature
Two-way Recording Subscribers can record conversations into
Two-way Transfer
Caller ID Callback
DID Call Routing*
Remote Call
Forwarding Set
Time
Synchronisation
Timed Reminder
Setting*
VM Menu*
1 DID Call Routing and Toll Saver using DID numbers are only available when
*
the VPS is connected to the following PBXs with DPT Integration.
•
•
2 When an incoming trunk call reaches the VPS via the PBX, the VPS will wait
*
about 5 s before answering the call in order to properly receive the Caller ID
information from the PBX. This waiting time is determined by the "Waiting
Time for Receiving Caller ID" setting (see 2.5.4 Parameters in the
Programming Manual).
3 Timed Reminder Setting and VM Menu are only available when the VPS is
*
connected to a KX-TDA series PBX (Version 2.21 or higher).
92 Installation Manual
their own mailboxes by pressing a
preprogrammed flexible button.
Subscribers can record conversations into
another person's mailbox by pressing a
preprogrammed flexible button. and dialling
an extension number.
If Caller ID information was received for a
call, the subscriber can easily call back the
caller while listening to the message the
caller recorded.
1 The VPS automatically sends calls from
preprogrammed DID numbers to the
specified extension, mailbox, or Custom
Service.
The subscribers and the Message Manager
can program their extensions from a remote
location to forward various types of calls to a
desired extension or an outside telephone.
Whenever the PBX sets a new date and time
or when DPT Integration is established, the
data is automatically registered in the VPS.
Allows subscribers to set the Timed
Reminder feature of the PBX using voice
3
prompts.
3 Allows subscribers to access subscriber
services by navigating through menus
shown on their Digital Proprietary
Telephones (DPTs).
KX-TD500: Software production date code 040901 or later.
(KX-TD500C: Q951AB or higher, KX-TD500RU: Q971AB or higher, all
other: Q271AD or higher)
KX-TDA series (Version 1.1 or higher)
Description
Compatible
Integration Type
APT DPT
—
—
—
—
—