Optional Devices And Battery Replacement; Two-Button Remote Control - 7208E; Four-Button Remote Control - 848/Alg - Gemini 932IT Installation And User Manual

2.0 - FUNZIONAMENTO TELECOMANDO E SOSTITUZIONE BATTERIA

3.0 - OPTIONAL DEVICES AND BATTERY REPLACEMENT

Remote controls have a low charge battery indicator that gives early warning to avoid malfunctioning. When the
batteries are fully charged the LED shows a steady light at the press of a button while, if the batteries are low, the
LED blinks.

3.1 - TWO-BUTTON REMOTE CONTROL - 7208E

REPLACING THE BATTERIES:
!
Separate the remote shells taking care not to damage the internal circuit.
!
Remove the discharged batteries.
!
Insert the new batteries. Pay attention not to invert the battery polarity.
!
Close the remote shells.
!
Make sure the remote works properly.

3.2 - FOUR-BUTTON REMOTE CONTROL - 848/ALG

Total system arming
REPLACING THE BATTERY:
1
PAGE 06 - USER GUIDE
Button 1: Arming
Button 2: Disarming
BATTERIES
Button 1:
& door lock
Button 3:
Partial arming
(sensor exclusion
& door lock).
2
Different type batteries can seriously damage the remote control
Discard used batteries properly in special dedicated containers.
LED
indicator
Button 1
Button 2
Use only CR1616 batteries.
batteries can seriously damage the remote
Discard used batteries properly in special
ATTENTION
!
Use only CR2032 batteries.
ATTENTION
!
control .
dedicated containers.
Button 2:
System disarming
& door unlock
Button 4 :
N/A
3 4
Different type
.