How To Configure Site-To-Site Ipsec Vpn With Watchguard - ZyXEL Communications ZyWALL 110 Handbook

Security firewalls zywall/usg series

Hide thumbs Also See for ZyWALL 110:

Table of Contents

How to Configure Site-to-site IPSec VPN with WatchGuard

This example shows how to use the VPN Setup Wizard to create a site-to-site VPN

between a ZYWALL/USG and a WatchGuard router. The example instructs how to

configure the VPN tunnel between each site. When the VPN tunnel is configured,

each site can be accessed securely.

ZyWALL Site-to-site IPSec VPN with WatchGuard Connected

Note: All network IP addresses and subnet masks are used as examples in this article.

Please replace them with your actual network IP addresses and subnet masks. This

example was tested using USG310 (Firmware Version: ZLD 4.25) and WatchGuard XTM 515

(Firmware Version: 11.10.4).

www.zyxel.com

Show Quick Links

Table of Contents

Do you have a question about the ZyWALL 110 and is the answer not in the manual?