ZyXEL Communications ZyWALL 110 Initial Setup Manual
Hide thumbs
Also See for ZyWALL 110:
- User manual (1090 pages) ,
- Handbook (749 pages) ,
- Handbook & instructions (255 pages)
Advertisement
Quick Links
www.zyxel.com
ZLD Initial Setup (4.25 Firmware)
This guide will provide initial setup instructions to get the ZyWALL/USG connected to
the internet.
Supported Devices
ZyWALL 110 – Firmware version 4.25 and newer
ZyWALL 310 – Firmware version 4.25 and newer
ZyWALL 1100 – Firmware version 4.25 and newer
USG40 – Firmware version 4.25 and newer
USG40W – Firmware version 4.25 and newer
USG60 – Firmware version 4.25 and newer
USG60W – Firmware version 4.25 and newer
USG110 – Firmware version 4.25 and newer
USG210 – Firmware version 4.25 and newer
USG310 – Firmware version 4.25 and newer
USG1100 – Firmware version 4.25 and newer
USG1900 – Firmware version 4.25 and newer
USG20-VPN – Firmware version 4.25 and newer
USG20W-VPN – Firmware version 4.25 and newer
Scenario
This guide covers first time setup for internet access on ZyWALL (ZLD)
routers.
1/9
Advertisement
Related Manuals for ZyXEL Communications ZyWALL 110
Summary of Contents for ZyXEL Communications ZyWALL 110
- Page 1 This guide will provide initial setup instructions to get the ZyWALL/USG connected to the internet. Supported Devices ZyWALL 110 – Firmware version 4.25 and newer ZyWALL 310 – Firmware version 4.25 and newer ZyWALL 1100 – Firmware version 4.25 and newer USG40 –...
-
Page 2: Initial Setup
www.zyxel.com Initial Setup Before we begin the internet (WAN) setup on the ZyWALL router, the following steps need to be completed. 1. Unpack the ZyWALL. 2. Connect the power supply (power cord) to the ZyWALL. 3. Press the power button on the ZyWALL to turn the device ON (router takes 3-4 minutes to power up). - Page 3 www.zyxel.com Note: If the default password has been changed, use the new password to login. If this is the first time setting up the device and it is not accepting the “1234” password please press the RESET button on the device (located in rear panel) and hold it down for 10-15 seconds.
- Page 4 www.zyxel.com WAN Setup Wizard The initial setup wizard will appear when logging-in to the ZyWALL’s WebUI for the first time. Follow the prompts to setup the WAN port connection. Click Next to run the wizard setup for internet access. Note: If the “Installation Setup Wizard” does not appear when you login you can still run the wizard manually. Please refer to the “Troubleshooting Tips”...
- Page 5 www.zyxel.com this option set to “Ethernet”. IP Address Assignment: Most ISP’s provide a dynamic IP address to residential subscribers. Set the IP Address Assignment to “Auto” to automatically receive IP address settings from your ISP. If you are paying for a fixed IP (static IP) please set the IP Address Assignment option to “Fixed”...
- Page 6 www.zyxel.com Note: The ZyWALL includes a 30-day trial of UTM services (Anti-virus, IDP/AppPatrol and Content Filter). Not all services are available on all ZyWALL/USG models. Click the Register button to complete the device registration with MyZyXEL. Registering the device is necessary to be able to download future firmware releases for ZLD appliances running firmware 4.25 and newer.
- Page 7 www.zyxel.com Once this process is complete close the window or click on the ZyWALL/USG WebUI tab to complete the setup. Click the Refresh button to have the ZyWALL/USG contact the MyZyXEL server to verify registration. The next screen will show UTM license activation, continue hitting Next until you reach the Wireless Settings option.
- Page 8 www.zyxel.com...
-
Page 9: Troubleshooting
www.zyxel.com Troubleshooting If internet access in not working after running the setup wizard: 1. Verify the ISP Parameters & IP Address Assignment settings with your service provider. 2. Make sure that P1 (WAN Port) on the ZyWALL is connected to the DSL/Cable modem.
Need help?
Do you have a question about the ZyWALL 110 and is the answer not in the manual?
Questions and answers