To Enjoy Even Higher Picture Quality; Connecting To The S Video In Terminal; Connecting To The Component Video In Terminals; Connection To A Stereo Amplifier - Panasonic DMR-EH75V Operating Instructions Manual

I Connecting to the S VIDEO IN terminal
The S VIDEO OUT terminal achieves a more vivid picture than the
VIDEO OUT terminal. (Actual results depend on the television.)
After completing After completing "Connection with a television"
(4 16), "Connection with a television and cable box or DirecTV
receiver" (4 17) or "Connection with a television and satellite
receiver other than DirecTV" (4 18), connect the S Video cable in
illustrated below.
Usually you can watch a picture from INPUT2 terminal. When you
want to playback VHS while recording on DVD, change to INPUT1
terminal.
i
Red White
Audio cable_ "_ S Video cable
Television R_white Y e,_Connected Audio/Video
For how to connect the Audio/Video cable (4 16, _), (4 17, _)
or (4 18, _)
[Connecting to the COMPONENT VIDEO IN terminals ]
These terminals can be used for either interlace or progressive
output (4 94) and provide a purer picture than the S VIDEO OUT
terminal.
After completing "Connection with a television" (4 16), "Connection
with a television and cable box or DirecTV receiver" (4 17) or
"Connection with a television and satellite receiver other than
DirecTV" (4 18), connect the COMPONENT VIDEO cable in
illustrated below.
Usually you can watch a picture from COMPONENT VIDEO INPUT
terminal. When you want to playback VHS while recording on DVD,
change to INPUT1 terminal.
• Connect to terminals of the same color.
This unit
i,o o,,le 2
Red White
Television
For how to connect the AudioNideo cable (4 16, _), (4 17, _)
or (4 18, _)
• Connection to a stereo amplifier
Amplifier's rear panel
Red White
This unit
or
• Connecting an amplifier with a digital input
terminal
• When connecting this unit to a television with an HDMI cable, set
"HDMI Audio Output" to "Off" in the Setup menu (4 77).
• To enjoy multi-channel surround sound DVD-Video, connect an
amplifier with a built-in decoder displaying these logo marks using
an optical digital audio cable and change the settings in "Digital
Audio Output" (4 76).
• Before purchasing an optical digital audio cable, check the terminal
shape of the connected equipment.
• You cannot use DTS Digital Surround decoders not suited to DVD.
• Even if using this connection, output will be only 2 channels when
playing DVD-Audio.
Amplifier's rear panel _JD
DIGITAL
SURROUND
Optical digital audio cable
Do not bend sharply when
connecting.
Insert fully, with
This unit
RQT8346