Bluetooth Pairing And Connection; Playing Music - Noam NUTV4 Owner's Manual

AUX Input
Connect to the Amplifier

Bluetooth Pairing and Connection:

1. Connect Bluetooth controller box to your device
Press and Hold
2.
lights (red)
The system will automatically go into pairing mode
3.
The power indicator will turn red for about 4-6 seconds and then
alternating red and blue (Bluetooth blue Power red)
Please be sure that Bluetooth is turned ON. Select NOAM Audio
on your device to connect Bluetooth controller (if the Bluetooth
controller is connected the light will turn blue and not flash)
When the device is out of Bluetooth range, Bluetooth will be
4.
disconnected automatically and automatically reconnect when
detected in range again. (If not please just repeat steps 2 and 3)
5. When Bluetooth is disconnected or the 3.5mm AUX Input is
plugged in, the power indicator will glow red.

Playing Music:

and hold for three seconds to turn On/OFF
1. Press
2. Press shortly in order to control the red background light
3. Press to start or pause the music
4. Press shortly for next track
5. Press shortly for Previous track
6. Press shortly for volume up
7. Press shortly for volume down
On/Off &
Background Light
Play / Pause
for three seconds until power indicator
Next Song
Previous
Song
5
Volume Up
Volume Down