Side Racks And Back Panel Cleaning - Whirlpool MAX-209S Instruction Manual

14. Water tank should be checked at least once per month. If necessary, take the water tank out horizontally and
put it back after cleaning.
15. If the appliance will not be used for long time, please disconnect the appliance from the power supply. Keep
the cavity clean and put it in an environment without corrosive gas.
16. Disconnect the appliance for lamp replacement. Use only parts supplied by manufacturer.
17. Use soft cloth or sponge to clean the food plate and oil collector plate. Do not use METAL SCOURING PADS,
ABRASIVE CLEANSERS, steel-wool pads, gritty washcloths, etc. to clean oven.
18. Oven cavity (top, side and bottom) should be cleaned and air-dry after each use, or cavity may be stained and
turn yellow. Stain can be removed with stainless steel cleanser (eg. Wpro Stainless Steel Cleanser)

SIDE RACKS AND BACK PANEL CLEANING

1. Unscrew the 4 locking nuts on side of the rack in order to remove side racks.
2. Unscrew the 4 locking nuts at the corners of back panel to remove it.
3 .Wash and air-dried the side racks and back panels. Repeat step 1 & 2 to re-install side racks and back panel.
45