Disassembly Instructions - Mitsubishi Electric MR-385S-W-A Service Manual

7

DISASSEMBLY INSTRUCTIONS

MR-385S-A MR-385SL-A
MR-385S-A(NZ) MR-385SL-A(NZ) MR-420S-A(NZ) MR-455S-A(NZ)
Unplug the power cord before prepairing and servicing
OPERATING PROCEDURE
1. Remove parts insider the Freezer room
(1) Photo 1st Remove Crystal shelf Freezer,
Ice corner tray assy, Ice tray, Ice box
Fan Grille
(2) Photo 2nd Remove scews for closing Lead cover F,
Remove 2 Rivets From Fan grille
(3) Photo 3rd Cut binder, remove poly bag, Take off
connector lead wire.
Fan motor
(4) Photo 4th Remove Fan motor after remove fan and
remove screw out of fan motor base.
Defrost thermal fuse and Freezer thermistor
(5) Photo 4th Remove fan grille out of bell mouth,
removethe connector and plug to take out the thermal
fuse and thermistor freezer.
Defrost heater and Drip tray
(6) Photo 5th Lift up evaporator and remove the defrost
heaterout of base after remove heater cover plate and
drip tray
Caution on assembly
(7) 1. Insert the fan into the base of fan motor's shaft,
check if the fan rotates with your finger.
2. When inserted drip tray to effect to slacken the
lead wire of defrost heater in order to prevent water
from entering the glass tube.
3. Attach defrost thermistor with muffler and lighten
the binder.
MR-420S-A MR-455S-A
Photo 1
Photo 2
Photo 3
Photo 4
Photo 5
Evaporator
Defrost heater
- 20 -
PHOTOS
Ice tray
Ice box
Rivets
Fan grille
Binder
Fan motor
Crystal shelf F
Ice corner tray assy
Screw
Lead cover F
Bag
Connector lead wire
Screw
Thermal fuse
Bell mouth
Def thermistor
Drip tray
Heater cover