Logging In As An Administrator - Canon imagerunner advance C5550i User Manual

Logging in as an Administrator

Log in as an administrator, otherwise important items regarding the network and security cannot be set. To set up the
user management after the setup is complete, you need to log in as an administrator. The default user name for the
administrator is "Administrator" and the default password is "7654321". The user name of the administrator cannot be
changed, but change the password to improve the security. The changed password should be known by the
administrator only.
● If you have forgotten the password for "Administrator," it can be returned to the default password. Press the
[Counter/Device Information] key
license key press <Start>
● If "Administrator" is disabled, it is enabled when initializing the password.（
Information in the Local Device(P. 561) ）
● You can prohibit initialization of the administrator password.
Password>(P. 813)
1
Press .
2
Press <Log In>.
3
Log in with the procedure.
Picture login
Press <Administrator>.
Keyboard authentication
1
Set the user name and password.
● Set the user name as "Administrator" and press <Next>.
● Set the password and press <OK>.
2
Press <Log In>.
● If you have not changed the administrator password, the message prompting you to change to a new
password is displayed. Press <Yes> and set a new password. You need to enter the new password
twice to confirm it.
● If you have already changed the administrator password, the functions will be available after you
successfully log in.
Setting Up
<Device Info./Other>
<OK>.
15
<Initialize Admin. Password>
Registering User
<Prohibit Initialization of Administrator
13WK-004
enter the