Falcon E3913i Installation And Servicing Instructions
  1. Manuals
  2. Brands
  3. Falcon Manuals
  4. Cookers
  5. E3913i
  6. Installation and servicing instructions

Falcon E3913i Installation And Servicing Instructions

Hide thumbs Also See for E3913i:

Advertisement

Table of Contents

See also: Instructions for Using
E3913i / E3914i
Induction Ranges
INSTALLATION and
SERVICING INSTRUCTIONS
CAUTION - READ THESE INSTRUCTIONS BEFORE INSTALLING, COMMISSIONING OR USING
THIS APPLIANCE!
The installer must ensure that the installation of the appliance is in conformity with these instructions
and National Regulations in force at the time of installation. Particular attention MUST be paid to:
BS7671 IEE Wiring Regulations
Electricity at Work Regulations
Health And Safety At Work Act
Fire Precautions Act
This appliance has been CE-marked on the basis of compliance with the Low Voltage and
EMC Directives for the voltages stated on the data plate.
WARNING
THIS APPLIANCE MUST BE EARTHED.
:
On completion of the installation, these instructions should be left with the Engineer-in-Charge for
reference during servicing. Further to this, The Users Instructions should be handed over to the User,
having had a demonstration of the operation and cleaning of the appliance.
IT IS MOST IMPORTANT THAT THESE INSTRUCTIONS BE CONSULTED BEFORE INSTALLING
AND COMMISSIONING THIS APPLIANCE. FAILURE TO COMPLY WITH THE SPECIFIED
PROCEDURES MAY RESULT IN DAMAGE OR THE NEED FOR A SERVICE CALL.
PREVENTATIVE MAINTENANCE CONTRACT
In order to obtain maximum performance from this unit we would recommend that a maintenance
contract be arranged with SERVICELINE. Visits may then be made at agreed intervals to carry out
adjustments and repairs. A quotation will be given upon request to the contact numbers below.
WEEE Directive Registration No. WEE/DC0059TT/PRO
At end of unit life, dispose of appliance and any replacement
parts in a safe manner, via a licenced waste handler.
Units are designed to be dismantled easily and recycling of all
material is encouraged whenever practicable.
Falcon Foodservice Equipment
HEAD OFFICE AND WORKS
Wallace View, Hillfoots Road, Stirling. FK9 5PY. Scotland.
SERVICELINE CONTACT
Phone: 01438 363 000
Fax: 01438 369 900
T100844 Ref. 2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the E3913i and is the answer not in the manual?

Questions and answers

Related Manuals for Falcon E3913i

Summary of Contents for Falcon E3913i

  • Page 1 E3913i / E3914i Induction Ranges INSTALLATION and SERVICING INSTRUCTIONS CAUTION - READ THESE INSTRUCTIONS BEFORE INSTALLING, COMMISSIONING OR USING THIS APPLIANCE! The installer must ensure that the installation of the appliance is in conformity with these instructions and National Regulations in force at the time of installation. Particular attention MUST be paid to:...
  • Page 2 IMPORTANT INFORMATION Warranty Policy Shortlist Warranty does not cover :- Correcting faults caused by incorrect installation of a product. Where an engineer cannot gain access to a site or a product. Repeat commission visits. Replacement of any parts where damage has been caused by misuse. Engineer waiting time will be chargeable.

  • Page 3: Section 1 - Installation

    Model (mm) (mm) (mm) (kg) Location of mains isolating switch should be identified for E3913i Range use in the event of an emergency or during cleaning. E3914i Range SECTION 2 - ASSEMBLY and 1.2 SITING COMMISSIONING The appliance should be installed in a well-lit position on a firm, level, non-combustable floor.

  • Page 4: Section 3 - Servicing And Conversion

    3.2 MAINS ACCESS PANEL (AT REAR) 2.4 INSTRUCTION TO USER After installation and commissioning is completed, please Ensure mains electricity is switched off. hand these instructions to user and ensure that the Remove fixings that secure access panel to lower corner person(s) responsible understand the instructions of rear panel.
  • Page 5 3.5 CONTROL SWITCH REPLACEMENT Carefully lift and remove top frame/ceran-glass plate Remove control knob and control panel as detailed in assembly and lay it upon a flat surface. Section 3.1. If replacing hob in the event of glass damage, ensure any Remove associated LED as detailed in Section 3.4.

  • Page 6: Section 4 - Spares

    3.2. LED indication for each cooking zone. c) Remove generator access panel as detailed in Section The faulty generator must be returned to Falcon 3.3. Foodservice Equipment for warranty analysis. d) Switches are connected to generator LIN connection via a bus system. Refer to wiring diagram on Page 9.
  • Page 7 SECTION 5 – 5.2.3 E3913i - With Oven Switched On Terminal I Actual I Max I Min INDUCTION TROUBLESHOOTING 30.45A 26.1A If a fault occurs during use, an error code will be 30.45A 26.1A displayed in a series of flashes.

  • Page 8: Error Code Table

    ERROR CODE TABLE Code Error Cause Action by user Unsuitable pan material Use suitable pan. Hardware over coil Wrong or defective coil Test the coil *. No inductor Reconnect induction coil wires to Inductor connection failure current generator. Test the coil * . Heat sink Air routes blocked.

This manual is also suitable for:

E3914i

Table of Contents