Caster Installation; Carton Contents - Craftsman 31014 Operator's Manual

HarDWare
tooLs requireD:
3/8" wrench
Hardware included:

cartoN coNteNts

cabinet:
Literature
Hardware bag
caster pack
1/4 - 20 x 5/8 Screw (Qty: 16)
1/4 - 20 nut (Qty: 16)
caster pack

caster iNstaLLatioN

items Needed:
1/4 - 20 x 5/8" (Qty: 16)
1/4 - 20 Nut (Qty: 16)
Screwdriver
3/8-in wrench
process:
• Remove bottom drawers. (See Operation Section, Part
b.)
• Lay the cabinet on its back. Use packaging material to
protect the finish.
• Mount both swivel casters on the same side of the unit
as the side handle.
• Attach the casters using (4) 1/4 - 20 x 5/8" screws and
(4) 1/4 - 20 nuts per caster.
• wrench tighten all screws. it is recommended not to
exceed 80 inch pounds of torque.
• Return the unit to its upright position.
• Reinstall bottom drawers.
Nut
2
assemBLy
Screw