Smartinfo Browser - Philips **HFL5011T/12 Installation Manual

14.3 SmartInfo Browser

SmartInfo used as Browser will display the content you created (preferably with CMND). This content
can be stored on the TV locally or on a dedicated server.
How to upload content for SmartInfo Browser locally:

Create the content with CMND

Save the files into to following folder:
TPM1532HE_CloneData/MasterCloneData/SmartInfoBrowser/ (xxHFL5011)
TPM1531HE_CloneData/MasterCloneData/SmartInfoBrowser/ (xxHFL7011)
The folder 'TPM1532HE_CloneData' or 'TPM1531HE_CloneData' should be in the root of the
USB flash drive

Switch ON the TV, insert the USB with the new content

Go to [Professional settings] [Upgrade and Clone] [Clone USB to TV] menu and press "OK" to
upload the pictures in the TV

Once done, exit [Professional settings] and reboot the TV and check your changes

Make sure your settings in the [Professional settings] are correct to show the browser content
in SmartInfo
In case you are using a separate server for hosting the content:

In this case all the required SmartInfo Metadata along with the configuration XML shall be
hosted on the server which shall be loaded from the [Server URL]

Every time the "SmartInfo" key is pressed the TV shall search and load/reload
"SmartInfoBrowserMetaData.xml"

Once "SmartInfoBrowserMetaData.xml"
"SmartInfoBrowserMetaData.xml", the TV shall retrieve everything from the server
is loaded, based
- 82 -
on the content of