Upgrade And Clone - Philips **HFL5011T/12 Installation Manual

6.3 Upgrade and Clone

 Navigate to the [Upgrade and Clone] menu
and open it
 You will see the screen on the left
Note: Cloning and upgrading over IP or RF
will happen automatically after the TV is in
standby for 5 minutes when [Auto Upgrade
and Clone] in the professional menu is set to
[On]
 Select the [Current Firmware and Clone
info] menu and open it
 You can see the SW version and the dates
when the last cloning action was done
 Select [Next] and press "OK" to see the
second page
 Select [Previous] and press "OK" to see the
first page
 Select [Close] and press "OK" to go back to
the previous page
 Select the [Clone USB to TV] menu and
open it
 Using this you will be able to clone from the
USB device to the TV
 On the top of the page you will see a
waiting animation while cloning is ongoing,
once finished it will change to Successful
 During the cloning process there will be a
[Cancel] button available on the bottom of
the page, press "OK" to cancel the cloning
process
 Press "OK" to close the page once the
[Cancel] is changed to [Close] and go back
to the previous menu
 If no USB stick is inserted you will see on top
of the page USB not found
- 20 -