Rear Window Wiper and
Washer
The ignition must be switched ON.
qRear Window Wiper
Turn the wiper on by turning the rear
wiper/washer switch.
Switch Position
Type
Type
No.
A
B
Intermittent
Normal
qRear Window Washer
To spray washer fluid, turn the rear wiper/
washer switch to the
the switch is released, the washer will
stop.
If the washer does not work, inspect the
fluid level (page 6-34). If it's normal and
the washer still does not work, consult an
expert repairer, we recommend an
Authorised Mazda Repairer.
Wiper operation
position. After
Switches and Controls
Headlight Washer
The engine must be started and the
headlights must be turned on.
If you want to operate headlight washers,
double flick the wiper lever.
NOTE
If the front washer is operated first
l
after turning on the headlights, the
headlight washer operates
automatically.
If air enters the headlight washer
l
fluid pipe under conditions such as
when the vehicle is brand-new or
after an empty washer tank is
replenished with washer fluid,
washer fluid will not spray even
when the wiper lever is operated. If
this occurs, perform the following
procedure:
1. Start the engine.
2. Turn on the headlights.
3. Double flick the wiper lever several
times until the washer fluid sprays.
When Driving
í
OFF
Washer
í
4-95
Some models.
Need help?
Do you have a question about the CX-5 and is the answer not in the manual?
Questions and answers
relink trunk tailgate opening
To manually unlock the tailgate latch on a Mazda CX-5 if it is closed while the liftgate is open:
1. Get a flat-head screwdriver.
2. Locate and remove the access cover behind the latch.
3. Look into the opening and find the lever on the right side of the mechanism.
4. Push the lever down with your finger or the screwdriver.
5. The latch will release, allowing the tailgate to function properly.
This answer is automatically generated